home *** CD-ROM | disk | FTP | other *** search
/ Cream of the Crop 25 / Cream of the Crop 25.iso / comm / n109_pt.zip / NETTAMER.DOC < prev    next >
Text File  |  1997-05-14  |  105KB  |  2,388 lines

  1. Copyright 1997 by Net-Tamer
  2. Internet: nettamer@cei.net
  3.  
  4. For the new to the net folks <G> = GRIN, ;) = wink, there are a
  5. lot of these little symbols running around on messages!
  6.  
  7.                   ***********************
  8.                   * PROGRAM DESCRIPTION *
  9.                   ***********************
  10.  
  11. Net-Tamer is a program designed to automate many of the tasks that you
  12. perform on Delphi, or any PPP dial up account. Net-Tamer will capture
  13. EMail and Usenet messages to files that you can later read while you
  14. are off-line. This saves you connect time and money, or if your access
  15. to the net is unlimited - frees up the telephone, so your spouse
  16. (or parents) won't gripe as much<G>. While reading your messages you
  17. can write replies or new messages that Net-Tamer will upload to your
  18. service on it's next call.
  19.  
  20. Net-Tamer has many more features. It also does FTP file transfers,
  21. Telnet, and World Wide Web. The web stuff is a bit tricky yet, but
  22. this will get better. It's speed will blow Netscape or similar programs
  23. away, already. If you have a better web browser, then you should
  24. use it. I make no pretense that the program compares to Netscape or
  25. MSIE, but on the otherhand, Net-Tamer does things that those programs
  26. will not do, including run on something less than a 486, work with
  27. speech software and braille terminals, and with many of the "palm top"
  28. PC's that are currently out there. No Windows CE machine with a
  29. rotten graphics screen, thank you. An HP100 or HP200 will run just
  30. fine.
  31.                        **************
  32.                        *GETTING HELP*
  33.                        **************
  34.  
  35. If you do not find specific instructions in this file, then I think
  36. it needs no explanation, or that the right *.KEY file will tell
  37. you what you need. I am often wrong, so drop me email if you don't
  38. understand something or you can't get something to work. Net working
  39. stuff is tricky and I can find no way to cover all the possibilities
  40. on the net and make the program entirely plug and play. You will need
  41. some patience to get the program setup. You can write to ms.nettamer@mci2000.com
  42. or nettamer@cei.net, anytime. Chris is a longtime assistant of mine,
  43. who I had to marry to keep her working for free<G>. She is better
  44. than me at explaining things in simple language.
  45.  
  46. You may also want a copy of the latest Net-Tamer FAQ (Frequently Asked
  47. Questions) file. Drop a note to nettamer@cei.net and just make the
  48. subject FAQ Please. I'll send it along. I will often include the FAQ,
  49. even if I am answering a question that appears not to be related to
  50. things that this file covers. Jeff Hawkins does a bang up job with it
  51. and I think it says somethings in a much simpler way than I do.
  52.  
  53. You may email me with a question, even if you do not register. It would
  54. be unfair to not give you a chance to try the working program, before
  55. you register. I WILL NOT ACCEPT A REGISTRATION IF YOU ARE HAVING PROBLEMS.
  56. That is poor business and would lead only to hard feelings, if the problem
  57. cannot be resolved. Not all problems can be solved, but most can.
  58. PLEASE DO NOT EMAIL THE LISTSERVE GROUP AND THEN CC ME. That means
  59. that I will get two copies of the message, which is very confusing.
  60.  
  61. If you do not understand a term in the doc file, consult the Terms
  62. list at the end of this file. ANY REFERENCE TO SOUND IN
  63. THIS DOC FILE DO NOT APPLY TO THE PALM TOP VERSION. The "palm top"
  64. version is No longer strictly for the HP95, HP100, HP200, and OG700 hand
  65. held PDAs. It is designed for small CGA mono-chrome graphics screens.
  66. If it does not work on your brand of palm top, then try the XT version.
  67. The XT version is known to be best for the POQET hand held.
  68.  
  69. You should also get the XT/286 version if you have a Hercules graphics
  70. card, or if an older Toshiba gives you trouble with the video.
  71.  
  72.  
  73.                        **********
  74.                        * CHANGES*
  75.                        **********
  76.  
  77. 1.09- I added a switch to allow the user to set the computer's time
  78.       via the network. The WWW routines are completely new. The program
  79.       now shows forms inline and they should be more accurate. It maybe
  80.       a bit tricky for users with speech, however. If you are in text
  81.       mode, the data entry line is shown as a series of underline
  82.       characters. Typically, the web site will have put some description
  83.       of the input field near the data entry line. To do data entry
  84.       (as for a search), press enter on the link to the field. The
  85.       program will show a dialogue box and you can type what you want.
  86.       When you are thought typing, hit enter. That does NOT send the
  87.       form. You should find a link to SUBMIT somewhere on the screen.
  88.       Press enter on this, when you have answered all the questions.
  89.       I still have a lot of work to do here, so bear with me.
  90.  
  91.       I  added 800 by  600 Vesa to the graphics in the 386 version, and
  92.       have fixed most of the form bugs. 
  93.  
  94.       I added a /NOCAP command line option. This is primarily useful
  95.       if the XT and PT versions, when the program is being run from
  96.       a floppy or flash ram card. Use this on those versions, when
  97.       the login script goes well, but the program does not get PPP
  98.       configured.
  99.  
  100.       Many of the login scripts previously listed in the doc file
  101.       are now separate files in the release archive. This may help some
  102.       new users, who are overwhelmed by the size of this file<G>.
  103.  
  104.       The reader.exe file now allows a user to mark messages from
  105.       the rotary listing of messages and then move the messages to
  106.       a separate file. The program will default the extention to DLU
  107.       if it is not given. Be sure to use the work MAIL in the filename
  108.       if you are saveing mail messages for later reading.
  109.  
  110.  
  111. 1.08.1 - Okay, okay. I have placed a switch in the program for the
  112.         mime headers. This will allow users who need to send high end ascii
  113.         characters in their text to use these, and let everyone else have
  114.         things the old way. If you send messages which require this (you
  115.         write in some language other than English), load the program with
  116.         the /8 command line switch to enable the 8 bit MIME headers. MIME
  117.         headers will always be attached, if you send a BINARY file via
  118.         BASE64. This affects the 386 and higher version only, since I have
  119.         not added this support to the XT or PT versions.
  120.  
  121.  
  122. 1.08-
  123.    You will notice some changes in the reader program. I hope these
  124. solve some of the problems with messages showing up. I have also added
  125. a new setup slot for email login name. My understanding it that MCI
  126. has gone to this huge email username so that their APOP routines will
  127. work a bit better. Check the /M command line switch. The program now has
  128. one main "hot key" for all services, while on line. That is F2. I have
  129. added back some of the other hot keys. Check the TERMINAL.KEY file.
  130. There are also two new "hot keys" which most will like. Read the file
  131. to find out what they are<G>.
  132.  
  133. I have removed the /NV (for no Vesa) which was in the beta version, since
  134. I think that the program will now do a better job on graphics card
  135. detection.
  136.  
  137. A new switch has been added to the XT version /Q for Poqet palm tops.
  138. That switch tells nettamer to make certain calls to enable the comm
  139. port on the Poqet. BIOS 1.30 or greater is strongly recommended for
  140. Poqet users.
  141.  
  142. Palm Top version is once again a generic program. It is designed for
  143. smaller CGA screens and uses a large font and some other tricks to
  144. make it more efficient. Do not be upset by this if you have an HP100/200,
  145. or OG700. The program should perform better than ever and now does
  146. inline CGA graphics in the WWW. Sorry, GIF support only at this point.
  147. I will look at adding JPG in another version.
  148.  
  149. If you use any graphics mode with this version on the 386 and higher
  150. version, the *.F14 font files must be in the main Net-Tamer directory.
  151.  
  152. See the new feature for mass email. This is for registed users only.
  153.                                                      
  154.  
  155.                     *****************
  156.                     * SCRIPT WRITING*
  157.                     *****************
  158.  
  159. I estimate that 30 percent of users will be able to get by
  160. with what I have included as the default login script,
  161. service1.log. That is for a service with no login prompts,
  162. which uses PAP or CHAP user verification. This includes such
  163. services as AT&T and MCI. I have also included several scripts
  164. with the program for services that I know are not "standard".
  165. These range from Compuserve (which has two possible logins,
  166. plus a couple of "special" ones which I did not include),
  167. DEMON in the UK and others. Another 30 percent
  168. will probably be able to use the service2.log file.   Look
  169. for your services script first.
  170.  
  171. If you are not one of the "lucky" 60 percent, then you will
  172. have to write your own login file. There is a good section
  173. about this later on in the DOC file. There are also sample
  174. scripts at the end of the DOC file, so you should not find this
  175. too hard, even if your service is not among the "samples".
  176.  
  177. If you can't write a script, try the "dumb terminal" mode.
  178. See the terminal.key file for details.
  179.  
  180. Just as a side note, you can find the setup information for MCI2000 in
  181. the *.INS file for their software.
  182. LOGIN USERNAME = mci_system_name
  183. LOGIN PASSWORD = mci_chap_secret
  184. EMAIL ADDRESS= Email_Address
  185. POP3 SERVER = POP_Server
  186. EMAIL LOGIN NAME = POP_Logon_Name
  187. EMAIL Password = POP_Logon_Password
  188. SMTP SERVER = SMTP_Server
  189. DNS addresses are listed as:
  190. DNS_Address=
  191. DNS_Alt_Address=
  192.  
  193. Many services will use similar setup files, so the information is
  194. there, if you look for it.
  195.  
  196.  
  197.           ************************************
  198.           *NOTE TO INTERNET SERVICE PROVIDERS*
  199.           ************************************
  200.  
  201. Net-Tamer requires a lot of information to get running that
  202. will cause some users problems. If you will email me, I will be
  203. more than happy to discuss the correct settings for your service
  204. and even to make changes in how the program works for your service,
  205. if necessary.
  206.  
  207. There is no charge for this, unless you were to want a site license
  208. or free registration of your users. As users of my other programs
  209. will tell you, I believe that a program lives and dies on service
  210. and will always try to provide that. Happy users register, unhappy
  211. ones don't. I do not give anyone permission to "pre-install" the
  212. program. It MUST be distributed in the original archive, unless you
  213. wish to purchase a site license. You MAY distribute a sheet of
  214. paper or a text file, explaining setup to your users with out
  215. charge. You MUST inform them that the program is shareware, if
  216. you do this.
  217.  
  218. If a service wants to have a customized version (pre-defaulted,
  219. no login script required, etc.) I will also discuss that. Call
  220. during normal business hours, 4:00 a.m. to 6:00 p.m. Central Time
  221. seven days a week. I get up early;)  Yes, I also do custom clients
  222. for particular uses. "Robots" are a specialty. I work cheap, but
  223. not for free<G>.
  224.  
  225.  
  226.                     **********************
  227.                     *IF YOU HAVE PROBLEMS*
  228.                     **********************
  229.  
  230. If PPP login negotiations fail, please email me a copy of the login.cap
  231. and PACKET.CAP files. These are now text files. Just import them to
  232. your message. These are only available for the 386 version, however.
  233. I didn't want to make the older, slower computers waste time on this.
  234.  
  235.     If you lock up immediately when first starting the program,
  236. then you did not run the READER.EXE program first, to create the
  237. *.DEF files. If you made it through setup, but lock at the welcome screen
  238. for the main program, then you are likely to have a sound card conflict
  239. with the program. Delete the *.WAV files in directory or turn Sound
  240. Off in setup.
  241.  
  242.    If you have other problems and can't find the answer in the DOC file,
  243. then drop me an email. I prefer this to be at my nettamer@cei.net address,
  244. unless you are a Delphi user. This lets me keep things straight about
  245. who and what I am talking about<G>.
  246.  
  247.                       *******************
  248.                       *SPECIAL THANKS TO*
  249.                       *******************
  250.  
  251. Thanks to MCI/NewsCorp and the Delphi service for orginally giving me the
  252. online time to work this out. Thanks to FTPADM@GARBO.UWASA.FI
  253. for bearing with what was a very rude FTP client at first. Thanks to my
  254. Rainbow offline reader users for the support and the beta testing. Special
  255. thanks to Sue Mark, a dear friend, who agreed to be the "voice of net-tamer"
  256. for the 386 and higher version. (GO REF MED SUP on Delphi and visit her forum!)
  257.  
  258.                  ************************
  259.                  *Net-Tamer REGISTRATION*
  260.                  ************************
  261.  
  262.  Net-Tamer is not a severely "crippled" program as most shareware
  263.  programs go. Yet there are three things that registration does.
  264.  1) It removes the delay and please register message.
  265.  2) It allows you to turn off the Net-Tamer "advertisement" which
  266.  is attached to email and usenet messages that you send.
  267.  3) It allows you to send "mass email".
  268.  4) It allows you to send me suggestions for upgrades (that I will
  269.     actually pay attention to).
  270.  5) It keeps me in business<G>.
  271.  
  272.  If you do wish to register Net-Tamer, then you should be aware
  273.  that registration is LIFETIME. That is, you may download any copy of
  274.  Net-Tamer and it will say "registered to" and your email address.
  275.  This fee is $35.00 (US). This covers all versions of the program
  276.  and any and all future editions on any machine that you or a member
  277.  of your household uses. This is a two-for-one deal. You also get the
  278.  right to use Rainbow Offline Reader for Delphi (American and British
  279.  on-line service).
  280.  
  281.  If you are a registered user of Rainbow Offline Reader for Delphi
  282.  or were a Registered User of Rainbow Offline Reader for the now defunct
  283.  NVN, you are already registered for Net-Tamer. Just move (or copy) the
  284.  file USER.EZ to the nettamer main directory. If you have lost this file,
  285.  then drop me email with the date that you registered and the name that
  286.  you registered under to nettamer@cei.net or ms.nettamer@mci2000.com
  287.  and I will send you another copy. I wouldn't like to see a little thing
  288.  like a hard disk crash mess up your registration<G>. If you register
  289.  Net-Tamer, then join Delphi on-line service at some point, just GO CUST
  290.  250 DAT RAI and get the latest Rainbow offline reader.
  291.  
  292.  Corporate users, Government Agencies, and other "non-personal" use
  293.  is treated on a case by case basis. If you are running a small private
  294.  non-profit organization, let me know and I'll "work something out"<G>.
  295.  
  296.  You may also snail mail a check to the address below. If you do
  297.  be sure to include your EMAIL address, so that I can send the
  298.  registration file. Sorry, I do not snail mail disks, unless you
  299.  include a stamped self-addressed envelope. This is usually a waste
  300.  of your time, since the latest version is always around on the net.
  301.  ftp://garbo.uwasa.fi/pc/connect/ or
  302.  ftp://ftp.simtel.net/msdos/internet/
  303.  for the latest "official release".
  304.  
  305.  Beta versions are uploaded to http://people.delphi.com/davidcolston/
  306.  I will also uuencode or file attach for those who cannot FTP.
  307.  
  308. The new address and telephone numbers for Net-Tamer are effective
  309. on 05/27/97
  310.  
  311. Net-Tamer
  312. 1407 Harvard Ave.
  313. Fort Smith, AR 72908
  314. (501) 649-8793, 649-8724
  315. or EMAIL:
  316. nettamer@cei.net or ms.nettamer@mci2000.com
  317.  
  318. I give service even if you do not register. You will then ask,
  319. "then why should I register?" The answer is that registration
  320. lets me keep working and upgrading the program. If you don't
  321. register, then I won't stay in business and then you will have
  322. no support and no upgrades. If you cannot afford to register
  323. because you are on a fixed income, then drop me a note. I will
  324. give you a registration, if you promise to pay when and if you
  325. win the lottery<G>.
  326.  
  327. I reserve all rights to the files included in this release, EXCEPT
  328. as noted under the files description section. I also claim copyright
  329. and the trademark for the names Net-Tamer, Nettamer, and variations
  330. of that name.  I do not warrant that this program will run on any
  331. particular computer, or under any and all circumstances. I will, however,
  332. work with users in any reasonable way that to get them running. I have
  333. been know to go so far as to make a singleton version of the program
  334. under extra-ordinary circumstances. So if you do have problems, I
  335. promise that you will lose patience, before I will<G>.
  336.  
  337.  
  338.                      *****************
  339.                      *PROGRAM UPDATES*
  340.                      *****************
  341.  
  342. I tend to upgrade the program about every month. I am hyper-active,
  343. so this is one of the reasons that I do lifetime registration. You
  344. are never required to upgrade. In deed, with lifetime registration
  345. there is no incentive for me to make a change just so you will upgrade.
  346. If you do upgrade, always save the old version first! I have been
  347. know to stick bugs in the program where there were previously none<G>.
  348. If a new version does not work, then please let me know. I will make
  349. every effort to fix it.
  350.  
  351. Registered users get the priviledge of sending me suggestions for
  352. improvement. As user's of my other programs will tell you, I do take
  353. these seriously, but do not necessarily make the change immediately
  354. or ever, if it would mess up something else. If I cannot make the
  355. change, I will tell you so and give my reasons. If a change is simple
  356. and straight forward, I will usually include it in the next release.
  357. If it is complicated and I said that I would "get around to it" some
  358. day, keep dropping me notes and reminding me. I do have Attention
  359. Deficit Disorder, so I do not take offense at this<G>.
  360.  
  361. I am rather arbitrary about version numbers. The beta "series"
  362. was .99 plus a letter. Current versions are numbered 1.xx.x.
  363. 1.00.x would be a minor bug fix for 1.00.0 A 1.0x.x would be additional
  364. features to a previous lower number. A version 1.1x.x will be very
  365. different than a 1.0x.x version. If I ever decide to name one 2.xx.x,
  366. then you can rest assured that I think that it is a MAJOR advancement.
  367.  
  368.  
  369.                  *************************
  370.                  * MENU'S, TOGGLES, ETC. *
  371.                  *************************
  372.  
  373. Net-Tamer is mostly menu driven. Each Menu has three ways it can be
  374. operated.
  375.  
  376. 1) You can mouse the line of the menu choice. (Micro-Soft or
  377. compatible rodents are supported.) Left Click = Select and Right
  378. click = ENTER. This is every where but the bottom screen line, where
  379. both keys are treated the same. Mousing a space is also = ENTER.
  380. (386 and higher version only.)
  381. 2) You can cursor to the line and press enter.
  382. 3) You can press the letter beside the menu choice (or in the case of
  383. a triple line list of files, you can press the letter of the row of
  384. your choice and the column number of your choice.)
  385.  
  386. A toggle is a light switch. If it's not on, it's off<G>. Some
  387. Net-Tamer menu's are toggle menus. For example, a list of the messages
  388. that you are considering down loading. If you want one of the
  389. messages, then press the letter choice, mouse the line, or cursor and
  390. press enter. This will change the status of the line to On or Get,
  391. etc. If you change your mind, while the line is still on the screen,
  392. you simply choose that item again. If there is more than one screen
  393. page of listings, then you also have the choice of MORE. If you wish
  394. to back up to a previous page, then press the cursor up key on the
  395. first menu line OR choose BACK UP, if that is a choice. The process
  396. continues till you choose QUIT or hit the cursor key. In single menus,
  397. you can go backwards by pressing cursor up on choice A. This rolls
  398. back the list (assuming you aren't at the first choice<G>).
  399.  
  400. File menus start with the root directory of your current drive. Select
  401. a directory name to move down one level. Select a . [DIR] listing to
  402. move back one level. If the purpose of the menu is to select a file,
  403. then hitting enter on the file name selects it. If the purpose of the
  404. process is to pick a directory, then enter on that directory and then
  405. select PATH COMPLETE, when you are where you want to be. These are
  406. mouse and cursor driven screens.
  407.  
  408. The COMM DEFAULTS and USER DEFAULTS screen are just displays. Press
  409. the letter number of a choice (or mouse it) to make a change. If the
  410. item is a toggle, you will hear, beep - beep, then the selection will
  411. change on the screen.
  412.  
  413. For help mouse the F1 box or press that key. This will bring up ON
  414. LINE HELP.
  415.  
  416. In general, Net-Tamer commands are not tough. When in doubt, press
  417. F1 and check out the various assistance files. The real secret is
  418. not to make this hard, because it isn't!
  419.  
  420.  
  421.                ********************************
  422.                *                              *
  423.                * INSTALLATION - INITIAL SETUP *
  424.                *                              *
  425.                ********************************
  426.  
  427.  
  428. ! ! ! IMPORTANT ! ! !
  429.  
  430. What follows is a step by step description of the Net-Tamer installation
  431. process. In order to operate, Net-Tamer needs to know some information
  432. about your computer system, modem, and Dial-up account. In addition, if
  433. you want to spell check, Share Spell and GD Spell are supported
  434. by the program. Place those in the main directory.
  435.  
  436. BEFORE running Net-Tamer read through this installation description
  437. and make sure that you have the information at hand to answer the
  438. questions. Taking a few minutes now will make installing Net-Tamer
  439. easier and you will be able to enjoy its features sooner!
  440.  
  441. *NOTE* If you have an OG700 also see the note from CRAIG@enterprise.net
  442. at the end of this doc file.
  443.  
  444.                    *********************
  445.                    * Running Net-Tamer *
  446.                    *********************
  447.  
  448. To run Net-Tamer make the Net-Tamer directory active FOR THE FIRST USE
  449. ONLY, type READER at the DOS prompt and press return. After the
  450. first time through setup, type NETTAMER to start the program directly.
  451. Select EDIT USER DEFAULTS and then EDIT COMM DEFAULTS. You need to
  452. look at BOTH setup sections. You will now be shown a screen with
  453. lots of questions about your equipment and another about your dial-up
  454. account. Review the screens carefully to be sure that all the information
  455. is correct and complete. Then PRESS the letter X to SAVE THE
  456. INFORMATION!
  457.  
  458.                      *** USER DEFAULTS***
  459.  
  460.  Enter your email address I think you can handle this. Your login
  461.  username is usually whatever comes before the @ sign in your email
  462.  address.
  463.  
  464.                    *** Dial up Password ***
  465.  
  466. Hey, I don't know it<G>. NOTE: Passwords are CASE SENSITIVE on most
  467. services!
  468.  
  469.                *** Use password to limit access ***
  470.  
  471. If you answer Yes to this question you can lock out people from
  472. using Net-Tamer to access your account without permission. Your
  473. service password is used for this. You, must remember the password
  474. yourself, if you want to get back into the program<G>. It is a
  475. major nuisance to enter your password every time you change modules,
  476. so think about this before you do it.
  477.  
  478.               ****SERVER NAMES & ADDRESSES******
  479.  
  480.  The program needs to know the names of your services' servers
  481.  for POP, SMTP, and USENET. These are not numbers, just the URL's.
  482.  You also have to enter the ADDRESS of the Host Name Server for
  483.  your service. This will be four numbers separated by a period.
  484.  This is the address that the program calls to find out where
  485.  everything is. You see, servers can change at any moment. Right
  486.  now, the mail server (pop.yourservice.com) might be at address
  487.  205.117.117.35, but the next moment, it could be down for service
  488.  and another machine could be handling that function. The Host Name
  489.  Server (or you some times will hear Domain Name Server) is
  490.  the address to ask where everything is.
  491.  
  492.   The information above, your email address, and your login user
  493.   name, etc. have to be given to you by your service provider. Ask
  494.   for the "technical person", if the person answering the telephone
  495.   doesn't understand what you want.
  496.  
  497.                   *** Spell Checker ***
  498.  
  499. Net-Tamer doesn't ask you about a spell checker. If either GDSpell
  500. or ShareSpell are in your Net-Tamer directory you will be asked, after
  501. writing a message, if you want to spell check your work. It is
  502. automatic, no defaults need to be changed.
  503.  
  504.                      *** Fonts ***
  505.                      (386 and Palm Top)
  506. 386 -
  507. I have included several fonts to be used with the release version.
  508. Font's REQUIRE A VGA or Monochrome graphics adapter card to use
  509. them. If you need a larger font, then try DBOX.F16. This is my own
  510. creation. It is not pretty, but it is as BIG as you can make a 16 X 8
  511. font. If there is real interest, I may well add the capacity for yet
  512. larger fonts. There are certain fonts which are required by the program
  513. if you want to use graphics in WWW, so do not delete these, if that is
  514. the case.
  515.  
  516. Palm Top-
  517.  
  518. The Program uses the standard HP fonts and some that are internal to
  519. the program. These cannot be changed. Sorry about this. If you don't
  520. like a font, then drop me a note. There are also some spots in the
  521. program where an 80 by 25 screen is required. Sorry about that also<G>.
  522.  
  523.                   *** Text Editor ***
  524.  
  525. You MUST select a text editor. Net-Tamer allows any text editor,
  526. which will accept a file name from the command line. RED is
  527. included with Net-Tamer. RED is freeware and you do not have to
  528. register it. You do not have to change anything to use RED and
  529. RED will word wrap.
  530.  
  531. You may prefer EDIT. EDIT is included with MS-DOS in releases 4.0
  532. and higher. The only problems with EDIT or EDITOR (if you use DR-
  533. DOS) is that they do not word wrap. Several good shareware
  534. text editors do word wrap. UEDIT, SEDIT, QEDIT, and SLED will all
  535. work with Net-Tamer. There are hundreds of text editors out there,
  536. so find one you like! Just be sure that if the program is not in
  537. the Net-Tamer directory, that you give Net-Tamer the path to it. For
  538. example, C:\DOS\EDIT for DOS edit.
  539.  
  540. YOU SHOULD CHANGE FROM RED AT LEAST TEMPORARILY WHEN YOU EDIT
  541. TAGLINES. It will eat them, if the file is TOO big (over 64k)!
  542.  
  543.                *** E-Mail Signature ***
  544.  
  545. At this time you can set a signature for E-Mail. To do so press the
  546. letter for Sign EMail and you will be prompted to enter the text for
  547. your signature.
  548.  
  549. When you are done entering the text you will be asked if you want
  550. to always use the signature, to be prompted each time, or to
  551. never sign messages, select whichever option you wish.
  552.  
  553.                *** Message Directory ***
  554.  
  555. Net-Tamer defaults to using the Net-Tamer main directory for the
  556. files it creates. Many files are created by Net-Tamer to store
  557. messages and other information Net-Tamer uses to keep track of
  558. things. If you want these files kept separate from the program
  559. files you must change the default. To do this press the letter
  560. marked message directory<G>. You will be ask which drive to store
  561. the messages on. Next you will be asked for the remainder of the
  562. path name. One option would be:
  563.  
  564. D:\NETTAMER\MSG\
  565.  
  566. In this example you would be using drive D and the MSG directory
  567. would be a sub-directory of your Net-Tamer directory. You MUST
  568. create this directory, yourself! If you add a second account,
  569. you should create the new message directory, even before you
  570. start reader.exe to enter the information.
  571.  
  572.                   ***Other defaults***
  573.  
  574. There are also defaults for music, no music, beep, no beep, single
  575. listed files menus, or triple and several other small things. Do not
  576. be alarmed. You do not have to set these, unless you want to. Try the
  577. defaults and then change things later, if you want. Not all of these
  578. choices are available in the XT and Palm top versions. For instance,
  579. it is not too smart for me to ask for display colors when I know that
  580. the screen in mono-chrome<G>.
  581.  
  582.                *** Storing the Defaults ***
  583.  
  584. Once you are sure that you have everything the way you want it
  585. press the letter "X" to save the information.
  586.  
  587.  
  588.                *** Modem Port/Comm Set Up ***
  589.  
  590. First question: which port your modem is connected to? Use the
  591. cursor or mouse to move the highlight bar and then press enter
  592. when the proper port is highlighted. Do not worry about IRQ's
  593. etc. Unless you KNOW you have a weird setup. Most users don't,
  594. so just select the port and Net-Tamer will default to the "normal"
  595. IRQ and address for that port.
  596.  
  597. If you don't know which port your modem is using, try checking
  598. the settings in an existing telecom program  (Telemate, Procomm,
  599. Qmodem, etc.) that WORKS with your modem and write that down.
  600.  
  601. If you couldn't find your modem port from other telecom software,
  602. try running the program MSD that comes with later versions of DOS.
  603. Type MSD at the dos prompt. When you are at the MSD screen you can
  604. press the highlighted letter that you see in each block to see more
  605. information on that subject or click on the block with your mouse. You
  606. want to check out the info for your mouse (if you have one) and note
  607. which COM port it is using. Then check the info for the COM ports.
  608. This will tell you which ports are active. Your modem could be
  609. connected to any of the active ports that your mouse isn't connected
  610. to.
  611.  
  612. If you have a "special IRQ" or need a special address (MOST PEOPLE
  613. DON'T NEED THIS), then pick option 5 and answer the questions. This
  614. is so that you can define your setup if it doesn't conform to normal
  615. DOS defaults. Net-Tamer will in most cases guess your port number, but
  616. I am still working on identifying the IRQ under Windows.
  617.  
  618. IRQ's 2 - 15 are supported.
  619.  
  620. IF you are using Windows 95, then you will need to check how that
  621. OS has the modem configured. Click on the following:
  622. My Computer
  623. Control Panel
  624. System
  625. Device Manager
  626. View By Connection
  627. Modem (this will be specific about the type).
  628. The screen will tell you which comm port the modem is assigned to.
  629. Now, back up to the View by Connection screen. Click on the comm port
  630. that Windows has assigned the modem to and then click on resources.
  631. That will show the port address and IRQ. Give the first number shown
  632. (such as 3F8) to Net-Tamer as the port address and the IRQ which Windows
  633. has assigned to that port, which is listed below the address.
  634.  
  635. TU.S. Robotics "Windows Modems" - Call U.S. Robotics and tell them
  636. that you need to get your VISA/MASTER card dial up program to work.
  637. (i.e. pretend that you are a retailer). They WILL tell you how to set
  638. up for a DOS program<G>.
  639.  
  640.  
  641.                *** Tone or Pulse dial ***
  642.  
  643. Press T or P to select (Almost everyone is a T, these days<G>.)
  644.  
  645.            *** Modem Initialization String ***
  646.  
  647. You can check your other telecom software's settings and see
  648. what init string is used there. Net-Tamer is fairly standard. If
  649. all else fails, try ATZ^M You will want the modem to use compression,
  650. if it is capable of this. That vastly speeds up the on-line stuff.
  651. You can also check the list at the end of this file.
  652.  
  653.            *** Modem to Computer baud Rate ***
  654.  
  655. This is the speed that YOUR modem talks to YOUR computer, not the
  656. speed that your modem talks to the modem at the other end of the
  657. phone line. If you browsed the suggested initialization string
  658. list when answering the previous question you should have also
  659. gotten a suggestion for the baud rate. Use this suggested value
  660. if you are not sure what to set this at. You can change to a
  661. slower setting if you have problems. Most internal 14,400 baud
  662. modems can use 57,600 baud for the modem to computer connection.
  663. Even an external 14.4 should be run AT LEAST at 19,200. Many
  664. 2400 baud modems can use 19,200 for this setting. This setting
  665. depends on YOUR equipment, each system is different. Faster settings
  666. will increase data transfer speeds. A 28.8  will usually need 115200 as
  667. the setting!
  668.  
  669. Palm tops and true XT's are a bit different. Always set 14.4 modems to
  670. 19,200 baud. Anything else set to the connect speed.
  671.  
  672.                   *** Phone numbers ***
  673.  
  674.  Each phone number that you enter requires a separate set of
  675.  data about the service on the other end and a separate log file
  676.  name. The log file will be the script for that telephone number in the
  677.  dialing directory. These default to service1.log, but you can
  678.  write your own and name it anything you want. YOU MUST WRITE A
  679.  SCRIPT FILE for some services. A list of some "well known" scripts
  680.  are attached at the end of this file.
  681.  
  682.   A phone number may be just the letters, "NONE". In that case, the
  683.  program expects a DIRECT comm port connection to a TCP-IP network
  684.  with a PPP interface. (A "null modem" arrangement.)
  685.  
  686.  To change this information, once entered, select change telephone
  687.  number and then reply Yes to the question about change 999-9999.
  688.  If an entry is correct, then just hit enter. You are only required
  689.  to change incorrect information, although the program will review
  690.  it all with you. BE SURE TO LEAVE NOTHING BLANK AND BE SURE TO PRESS
  691.  X TO SAVE CHANGES IF YOU MAKE ANY!
  692.  
  693.  
  694.                *** Rotate numbers if busy ***
  695.  
  696. If you entered more than one phone number you can elect to
  697. rotate between them if Net-Tamer fails to connect to your first
  698. choice. Just press the appropriate letter. You may select a
  699. different number from the terminal screen, before you dial. Just
  700. press alt + a.
  701.  
  702.          *** Reinitialize modem for every call ***
  703.  
  704. This is a yes or no question. Most modems don't need to be
  705. reinitialized, but you can select Yes if you've had trouble in
  706. the past with your modem locking up or otherwise acting in an
  707. unusual manner.
  708.  
  709.                   *** Download directory ***
  710.  
  711. You may select a download directory for files which the program
  712. retrieves via FTP or the World Wide Web in the program setup.
  713. If this path doesn't exist you will be ask if you want Net-Tamer to
  714. create it.
  715.  
  716. If the path is valid you will be asked if you want to view the
  717. contents of this directory. If you view the contents you will
  718. then be asked to confirm the directory's selection.
  719.  
  720. An easy way to keep track of downloaded files if you use more
  721. than one telecom program is to create a separate directory just
  722. for downloads and have all of your telecom programs put downloads
  723. there.
  724.  
  725. NET-TAMER DOES NOT SUPPORT DSZ or GSZ. These are ZMODEM protocol
  726. drivers, which are not normally used on the net. IT WILL DO X AND
  727. YMODEM DOWNLOAD IN TELNET. Select the protocol and furnish all the
  728. information to the BBS first, then press page down for this option.
  729. This is only needed, if you telnet into a "normal" BBS. Select FTP
  730. UPLOAD or DOWNLOAD from the FTP menu.
  731.  
  732.                    *** BIOS for video ***
  733.           (Applies to XT and 386 versions only.)
  734.  
  735. The default for this is No. If you tell Net-Tamer to use the BIOS
  736. routines information will be written to the screen a bit slower. This
  737. is NECESSARY, if you are a visually impaired user and use a
  738. "talker" or your PC has a very "different" video card.  During an
  739. auto-run, all writes are to the screen, except for messages in the
  740. status line window at the bottom of the screen, even if you selected
  741. the BIOS mode. This keeps a "talker" quiet and will make the program quicker
  742. when doing the robot stuff.  Even if BIOS mode is selected, some things
  743. are printed directly to the screen, even if not on auto run. This
  744. prevents the program from "talking too much". After all, you would not
  745. want the talker to tell you every time the second number on the clock
  746. changed<G>.
  747.  
  748. The 386 and higher version now 4 graphics states:
  749. BIOS ON and loaded with the /NOPIX option, shows no graphics and does not
  750. show graphics links.
  751. BIOS ON and loaded WITHOUT the /NOPIX option, does show the graphics links,
  752. but does not show graphics.
  753. BIOS OFF and loaded with the /NOPIX option, shows the page with graphics
  754. fonts but does not show graphics inline.
  755. BIOS OFF and loaded WIHTOUT the /NOPIX option, shows the page with graphics
  756. fonts and inline graphics.
  757.  
  758.  
  759.  
  760.          **** Adding Net-Tamer and Icon to Windows 3.XX*****
  761.                (Yes, it does run under Windows 95)
  762.  
  763. If you want to add Net-Tamer and it's icon to your windows directory,
  764. in program manager, do the following: minimize and highlight the
  765. box you want to add Net-Tamer to (accessories, main, whatever). Then
  766. hit FILE then NEW then pick New program ITEM, hit enter, then hit
  767. the browse button that comes up until you see the Net-Tamer directory
  768. and the Net-Tamer.exe file. Hit enter on that, then hit OK. Now you
  769. will need to enter in the "Path". Enter the drive and main directory
  770. where your nettamer.exe file is..(i.e.:c:\nettamer), then there is also
  771. a little box that says "change icon". You hit that and it will say
  772. there are no icons available for that group. So you will be given
  773. another set to browse through, change the directory there to reflect
  774. where the tamer.ico is and you hit enter on it and then ok and you
  775. are all set.
  776.                *** Program Start Screen ***
  777.  
  778. Quit the group setup main menu and then select "OTHER FUNCTIONS"
  779. and click or press enter! That will take you to a welcome screen.
  780. Press enter or mouse the appropriate box!
  781.  
  782.                     ***USENET SETUP***
  783.  
  784. A NOTE ABOUT USENET PASSWORDS:
  785. A very few usenet readers require a username and password. The program
  786. now looks for this and supplies your email address and password, if it
  787. is questioned. If you need to give information OTHER than that, the
  788. program also looks for a file called USENET.NFO. Using a text editor
  789. type in on a single line your user name for this reader a Bar character (|)
  790. and your password for the reader. Place this file in the message directory!
  791. I expect very few users to find themselves needing this file.
  792.  
  793. Select item B from the F3 WORK menu in the dialing section of the
  794. program, or E from the Reader module main menu.
  795.  
  796. Select ADD A GROUP, you will see a list of all of the current
  797. available groups, the list is quite long. There are more than just the
  798. ALT. groups, so be sure not to miss any <G>.  Find the name of the group
  799. you wish to access and press enter, or mouse your choice.
  800.  
  801. You will then be asked if you would like to make this group PERMANENT.
  802. If you say YES, Net-Tamer accesses this group on every pass, and the first
  803. time, it will get only 50 messages. After that it will get ALL new
  804. messages which you have not yet downloaded. You might be surprised to
  805. find your self downloading hundreds of messages.  MY SUGGESTION......
  806. Just say NO<G>.
  807.  
  808. Once you have all of the groups you want entered, RE-select them one by
  809. one. When you press enter a second time, the program will default to
  810. 1S-
  811. This means to get a listing of all the message subjects. Do this for
  812. all groups that you have selected the NO option for. Now, send the
  813. program back on line. After it logs off, the program will take you
  814. to the read email section. Press escape and come back to the terminal
  815. screen. Now press F3 and re-select menu option B. If you requested
  816. an updated listing of groups, the program will take a moment to clean
  817. up that file, then you will see the menu again. Press enter on the
  818. groups that you have selected as NO. Now the program asks if you want
  819. to sort the list. I usually say "YES". Now press enter on any message
  820. that you decide you want. Press escape or select QUIT from the menu
  821. when you are through with this. The program will ask if you want
  822. a new listing. If it has been a while since the program got the
  823. list you just looked at, answer yes. Otherwise no. If you are
  824. through with the list then answer yes to delete the list.
  825.  
  826. After you have finished doing this, send the program back on. It will get
  827. only those messages that you picked from the menu.
  828.  
  829. If you did not request a new list and press enter on the group
  830. again, the program defaults to getting all messages higher than
  831. the last one it scanned. If you want a list again instead of messages
  832. delete the dash at the end of the number and change this to an
  833. S-, so the entry might look like 256S-, instead of 256-.
  834.  
  835. You can select option B again from the F3 Work Menu to select
  836. whether to now get ALL of the messages posted to the group, a range of
  837. messages, subjects only, or headers only.  If you want ALL of the
  838. messages do not change the number in the block.  If you want a range,
  839. backspace out the number that is there, and type in the range.  For
  840. headers or subjects add either an H or an S before the -, or select a
  841. range for either (ie 100S-, 350S-500S, 550H-800H, etc).  On your next
  842. pass, Net-Tamer will get what you've requested.
  843.  
  844. On sorting messages, select either threaded or no sort. Threaded
  845. attempts to place replies after the message that the reply responds
  846. to. This will show the messages you received in the same order as
  847. they appeared in the subjects list when sorted. If you select no
  848. sort, the messages are left in the same order that they were downloaded.
  849.  
  850. Once you have actually received the messages, you will see the groups
  851. listed with your files in the read messages area and you can read the
  852. messages just like you do email messages.
  853.  
  854.  
  855.                           ***DIALING***
  856.  
  857. Press F6. If you want to stay online and play, after the program
  858. has gotten messages, then select a stay-on-line choice.
  859.  
  860.                       ****ON LINE****
  861.  
  862. Once Net-Tamer dials the telephone, what happens next depends on what
  863. dialing choice you selected. First, it will establish a PPP link.
  864. This is all the stuff in the status box about "received PPP Code",
  865. etc. Once this is complete, the program will first try to check
  866. your email, if your dialing choice indicated a desire to do this.
  867. If you have selected GET ALL/DELETE ALL in the server maintenance
  868. menu of reader.exe, then the program will delete the incoming messages
  869. as received. If you have a server that supports the LAST command
  870. then you can use the MENU options A-E, if your server doesn't
  871. support this command, then you can only use the get/all delete
  872. none or get all delete all choices.
  873.  
  874. After it checks incoming email, it will check the directory to see
  875. if you have any out-going email. If so, then it will call the SMTP
  876. server and take care of this. If you selected a choice indicating
  877. a desire to get usenet messages, the program will call the NEWS
  878. server. If there are out going messages, the program will send these
  879. before it gets any new ones.
  880.  
  881.                           -FTP-
  882.  
  883. Usenet messages are NOT gotten regardless of the dialing choice unless:
  884. 1) You declare at least one group to be "every time", or
  885. 2) You have selected a usenet group to retrieve messages from prior
  886. to dialing.
  887.  
  888. Once these chores are complete, the program will either LOG OFF, if
  889. that was part of your dialing choice, or it will display some of the
  890. "hot keys" you might now wish to use in the status box on the bottom
  891. screen line.
  892.  
  893. Once the program is through with whatever run it had to do then
  894. alt+<W>eb alt+<F>TP etc, shows up on the status line. Hit alt + F.
  895. The program will show you a list of FTP sites. Not all of them work,
  896. so let's find one that does. Select the FIND box and press enter. Type
  897. in garbo and hit enter. The program will find: garbo.uwasa.fi
  898. Press enter on that. The next thing you know, the program will
  899. be logging in to that site. Take the default name and password. The
  900. program will list the FTP servers directory for you. Just cursor down
  901. till you see what you want. If you press enter on a directory,
  902. the program will CD to that directory and pull another list.
  903. If you press enter on a file, the program will download it.
  904.  
  905.                          -WWW-
  906. If the program is displaying a Web page, it may not all fit on the
  907. screen. Press page down to see more and page up to go back. Press the
  908. letter of a choice to take it, or press the cursor down key or cursor up key
  909. then press enter to execute the command. You may also mouse the
  910. <A> or other letter which is displayed. Cursor left goes back one web
  911. page. Escape leaves that Web Site, but does not remove you from the WWW
  912. section, unless you are at the end of a link. You may edit any WWW
  913. URL, after selecting it. This will allow you to go directly to some
  914. places which do not show a link on the current page.
  915.  
  916. The 386 or higher version now supports in-line graphics, if you have
  917. an EGA or VGA card. The mouse is only a cursor. Do NOT click on it.
  918. Use the cursor keys or tab and press enter instead to change links.
  919. Links are in RED! To see the in-line graphics, you MUST turn BIOS
  920. OFF in the comm/screen defaults section. It is on by default.
  921.  
  922. In the 386 and higher version, you may also download and display
  923. any graphics file, or download and listen to sound files, with out
  924. leaving the program. These files are always saved, but WEB pages
  925. are only "captured" while you are in the WWW section of the program.
  926. As soon as you exit the this section, all HTM files are deleted,
  927. unless you used the ctrl + s, key to save them. You may also play
  928. sound files in the same way. Real Audio is not supported. I will
  929. include that as soon as I can find out the format of such files.
  930. You may mark a favorite web page to your bookmark.fav file, by
  931. pressing ctrl+f, while viewing the message.
  932.  
  933. If you have the 386 version and do not wish graphics, then be sure
  934. to set BIOS to ON in the COMM setup section. If you want graphic fonts,
  935. but no inline GIF's or JPEGs then load the program with the /NOPIX
  936. command line switch.
  937.  
  938. This version of Net-Tamer supports forms, at least a little. You
  939. can do a search on www.yahoo.com and use that to find most anything
  940. you want on the net. Hit alt + w, and enter www.yahoo.com. When
  941. you get there, select the <H-FORM> block (The letter in front of
  942. FORM may change). Next enter the word or phrase that you want to
  943. search for, for example, nettamer. Press enter. Yahoo may or may not
  944. find this. If it doesn't or even if it does and you want more
  945. choices, then select the letter at the bottom of the page which
  946. indicates a link to altavista. Yahoo will supply the completed form
  947. for this search.
  948.  
  949.  
  950.  
  951.                          -TELNET-
  952. The bottom of the screen tells you what functions or hot keys
  953. are available in telnet. Use page down to start a X or Y modem
  954. download, where a service supports this.
  955.  
  956. You can telnet to an ARCHIE service. Hit alt + T and type in:
  957. 204.179.186.65 as the URL. Login as ARCHIE.
  958.                         
  959.  
  960.                     ***Message Viewer***
  961.  
  962. After the program has logged off with messages, press F3, then select
  963. option A to get to the messages you have downloaded. You then see a
  964. menu with the "mail bags" for viewing. Select one!
  965.  
  966. Many message commands are on the screen, however, you can get a
  967. complete list by pressing alt + h. To go to the next message, hit
  968. enter, or the space bar. (You may also page down to the next message
  969. or cursor up to go backward, if you prefer.)
  970.  
  971. <S>ave means to save the message, just press the letter S. You may
  972. save a message to a file, the printer, or an archive file. The archive
  973. files are for "permanent keeper" messages. You may select the archive
  974. files for viewing by selecting that choice on the "mail bag" menu.
  975.  
  976. The letter S is also handy if you received a UUENCODED file. Net-Tamer
  977. will spot those and ask, if you want to "strip off the message
  978. header". You should say, "yes" under most circumstances. Save the
  979. "pieces" of the uuencode to the same file (in order of course), then
  980. press alt + u to extract the binary file it is hiding<G>.  IMPORTANT:
  981. Although Net-Tamer will ask for a path for the decoded files to be
  982. stored, it expects the encoded files to be in the message directory.
  983. Pressing alt U, does not yet allow you to select a path for files to]
  984. decode.  After you have saved these to a file, press alt + u and
  985. then Net-Tamer will do it's stuff and decode these! If you wish to, you
  986. can also go the setup screen and do a UUDECODE there. It will let
  987. you specify something other than the message directory being where
  988. the UUE files are located.
  989.  
  990. To reply to a message, press R. To write a new message, press W. You
  991. may press G to get an old message. This selection now has several
  992. options of which I am sure you will approve. You may get a thread, a
  993. single message or a message only from or to a particular user.
  994.  
  995. MASS EMAIL - I have changed the mass mailing routines in nettamer.
  996. These were not very satisfactory to me and they were not easy to use.
  997. As of 1.08, REGISTERED users may enter a file name in the To: field
  998. of a message and then type the email message in the normal manner.
  999. If Net-Tamer finds a file name instead of an address, at the time
  1000. of upload, then it will send multiple copies of the email that follows
  1001. to everyone listed in that file. There will be ONLY one name per message
  1002. and there is no limit to the number of addresses. This amounts to a
  1003. "blind carbon copy" for every one in the list. You may NOT use
  1004. the address.lst file for this. Instead, the file must be a <CR><LF>
  1005. delimited list of addresses only. As below:
  1006. nettamer@cei.net
  1007. ms.nettamer@mci2000.com
  1008. bjones@something.org
  1009. president@whitehouse.gov
  1010.  
  1011. You may make this file with any text editor or use the alt + G function
  1012. in the message viewer. There are a couple of "special tricks", of course.
  1013. If for some reason you to want multiple names in the To: field, then
  1014. put a comma after the email address. Like below:
  1015. nettamer@cei.net,
  1016. ms.nettamer@mci2000.com
  1017. bjones@something.org,
  1018. president@whitehouse.gov
  1019.  
  1020. This would be sent as two messages, with nettamer@cei.net and
  1021. ms.nettamer@mci2000.com getting one copy and bjones@something.org
  1022. and the prez getting the other. In other words, the names per copy
  1023. stops, when the program no longer finds a comma at the end of the
  1024. address. If you do wish to let someone know that this is a CC,
  1025. the do it this way:
  1026. nettamer@cei.net/CC
  1027. ms.nettamer@mci2000.com,
  1028. bjones@something.org,
  1029. president@whitehouse.gov
  1030.  
  1031. This would be sent as a single email with nettamer getting the "to:"
  1032. copy and the others listed as CC's. If you have questions about any
  1033. of this, please drop me a note. Please do not use this feature to
  1034. "spam" a lot of folks. This is an often requested feature and I
  1035. decided to include it as a registered only feature as a way to say
  1036. thanks to supporters.
  1037.  
  1038. Press alt + G to "steal" a tagline from a message. This screen will
  1039. give you directions on how to save it. Once you press enter, you can
  1040. edit the line or press enter again to send it to the tagline file.
  1041. Everyone "steals" taglines. This is expected. There are only three
  1042. ways to get taglines, steal them. Download a "starter" list from the
  1043. CUSTOM 250 group, or type in your own!
  1044.  
  1045. The V command has lots of extra options for users in determining
  1046. which messages to read. This gives a menu driven view of all the
  1047. messages. Who they are form and to as well as other information. The
  1048. program marks the messages that you have not read with a U. When
  1049. you get more messages the next time, Net-Tamer will begin by reading the
  1050. first unread message, even if it is in an older download. If you do
  1051. not want to read the messages, just mark them for deleting. D does
  1052. that, or press V and do it with your mouse or the cursor key<G>.
  1053.  
  1054. PRESS A to save a messages from address to the address.lst file.
  1055.  
  1056. Alt + H lists ALL commands. What we have just discussed is only a
  1057. partial list. That choice is highlighted on the bottom of the screen!
  1058.  
  1059. For group messages and usenet messages, there are three ways to
  1060. generate new messages, while you are viewing them.
  1061.  
  1062. 1) You can press R to reply in the group,
  1063. 2) You can press R and reply by email, or
  1064. 3) You can also press W to write a new message. That allows you
  1065. to quote the current message and include it in the new message.
  1066. It also allows you to change the subject and/or topic.
  1067. 4) You and press Ctrl and R at the same time, which short cuts
  1068. the reply process. Ctrl + R asks no questions about group or email,
  1069. change of subject or CC's. It accepts all current Subjects,Cc's,
  1070. and who the message is from as being the correct information. This
  1071. option also allows you to write a second reply to the same message.
  1072. The current message IS NOT QUOTED. This is a "short cut" command.
  1073.  
  1074. The email option is needed for USENET, because some groups are
  1075. moderated or anonymous. Those messages are replied to by email.
  1076.  
  1077. Press R on one you want to reply to. The program will ask you, if
  1078. you want to quote the current message. Simply press Y or N for yes
  1079. or no. If you quote the message, Net-Tamer formats the entire message
  1080. and sends it to the text editor. Delete any extraneous remarks,
  1081. taglines or other things you do need to make a point in the message or
  1082. for clarity. In short, use the text editor to pick out those parts of
  1083. the message that are really important! Over quoting leads to big fat
  1084. messages, which don't say anything<G>.
  1085.  
  1086. If you enabled a signature, then Net-Tamer will attach the tagline and
  1087. the signature to your current message. Now, save the message and exit
  1088. your text editor.
  1089.  
  1090. When you are through, you may press the R key again to review the
  1091. message and make corrections or wait till you are through with all
  1092. messages to review them. That choice is offered, when you press M or
  1093. escape to quit looking. F10 will take you out of the program, so don't
  1094. pick it, if you don't want to get dropped back to DOS<G>.
  1095.  
  1096. To write a NEW message, select that choice from the main viewer menu,
  1097. or press W while viewing messages.
  1098.  
  1099. CREATING AND SENDING EMAIL/usegroup MESSAGES WITH Net-Tamer
  1100.  
  1101. Ok, these are the steps to write an original mail from scratch.  First
  1102. go to  **Create A New Message and hit (enter). You then pick email or
  1103. usenet. Once that is done, the program will walk you through a series
  1104. of questions, such as subject. What happens next depends on the editor
  1105. you are using. Just be sure not to over type the message header information.
  1106. The exit command for RED or TED and for UEDIT is F10. 
  1107. You have now saved a letter to be sent out via your next autologon
  1108. with Net-Tamer. It SHOULD go if you follow these instructions.
  1109. Do not touch anything that is there already, which is the message header
  1110. information, unless it is wrong.
  1111.  
  1112. The first line is always the To: address. The first line not followed
  1113. by a /CC or comma is the subject line. So:
  1114. fred@wildhog.edu,
  1115. sally@barnhill.net /CC
  1116. chuck@round.ball.org
  1117. How about the game?
  1118.  
  1119. Would mean that the message is to go to fred and sally, with a copy
  1120. to chuck and a subject of "How about the game?" Just start typing
  1121. below "How about the game".
  1122.  
  1123. Net-Tamer saves outgoing email to CCMAIL.dlu, so you have a "permanent
  1124. copy" of your replies. You may save this to a disk file and easily
  1125. edit the information, if a message was lost. Anything named mail
  1126. with an extention of $ and a number is assumed to be outgoing email.
  1127.  
  1128.                       ***Taglines***
  1129.  
  1130.       You may press alt + r to find a random tagline!
  1131.  
  1132. You may now search for a tagline (if you enabled that in set up).
  1133. You may have two line taglines. Place a <> at the end of the first
  1134. line to indicate that the tagline continues on the next line. PRESS
  1135. ENTER ON THE FIRST LINE!
  1136.  
  1137. Taglines are message closers. They may be witty, thought provocative
  1138. or just something about you. Most taglines are (gasp) "STOLEN"! If
  1139. you see one you like, Net-Tamer is an accomplished thief. Just hit alt
  1140. + g at the same time!
  1141.  
  1142.  
  1143.               ****Command Line Switches****
  1144.  
  1145. From the DOS prompt in the Net-Tamer directory, type reader and press
  1146. Enter If Net-Tamer mis-guesses your video address, you may run READER.EXE
  1147. with the /G command line switch. /G B000 would be mono-chrome graphics
  1148. (not just a mono-chrome display. Hercules graphics fall into that
  1149. category) or /G B800 for color graphics. BE SURE you use zeros and
  1150. not o's. The other command line switched apply to nettamer.exe
  1151.  
  1152. Use the /8 command line switch, if you write non-English messages
  1153. that use the high ascii characters. This puts the correct MIME headers
  1154. on the outgoing file.
  1155.  
  1156. Loading NetTamer/A (plus a number, if you have more than 1 account
  1157. defined) tells Net-Tamer to dial service using option A, then to
  1158. immediately end the program on log off after the run. This is useful
  1159. if you have a TSR timer program. /A2 means to do an autopass for
  1160. account 2.
  1161.  
  1162. For the XT version only, the /Q command line switch allows the program
  1163. to run on the POQET hand held PC. 
  1164.  
  1165. Nettamer /I tells the program to put <> around outgoing email addresses.
  1166. This is needed on some services.
  1167.  
  1168. Nettamer /O tells the program to identify itself to the SMTP server
  1169. with the user's email address and not IP address.
  1170.  
  1171. Nettamer /NOPIX works only in the 386 version. It tells the program
  1172. to use graphics for WWW, but not to download the graphics files
  1173. automatically. This results in a display which uses several different
  1174. fonts, but does not show the gif files attached to the web site.
  1175.  
  1176. Nettamer /NV corrects the program, if the web graphics display in
  1177. the 386 version is messed up. /NV stands for NO VESA graphics. The
  1178. changes the display to 4 bit EGA/VGA graphics.
  1179.  
  1180. Load Nettamer /M if your service requires APOP authentication for
  1181. Email.
  1182.  
  1183. Load Nettamer /P if your service requires you to use a Proxy
  1184. Server. This is ONLY required once.
  1185.  
  1186. Load Nettamer /NOCAP for no cap files. This is primarily useful
  1187. if the XT and PT versions, when the program is being run from
  1188. a floppy or flash ram card. Use this on those versions, when
  1189. the login script goes well, but the program does not get PPP
  1190. configured.
  1191.  
  1192. MULTIPLE ACCOUNTS:
  1193.  
  1194. Some people (or families) have more than one account for a service.
  1195. No need to have separate copies of Net-Tamer or let all the messages
  1196. run together. Just select add a user in the Reader.exe main menu.
  1197.  
  1198. You may choose to have the program create the directory, if you wish.
  1199. I have mine set up as sub directories off the main Net-Tamer directory,
  1200. but you may declare them to be anywhere you wish, even on a different
  1201. drive. A Taglines.dat is maintained for each message sub-directory.
  1202.  
  1203. You must have the following files in the main Net-Tamer directory:
  1204. USER.EZ (The registration file.)
  1205. nettamer.EXE <G>.
  1206. reader.EXE
  1207.  
  1208. Net-Tamer.DOC (you can find things in this document from the program!)
  1209. and the *.KEY files for on-line help.
  1210.  
  1211. Also put the login scripts that you are using in the same directory.
  1212. You may have several of these, if you have more than one telephone
  1213. number.
  1214.  
  1215. USENET:
  1216.  
  1217. Usenet is like a giant list of groups, but the participants are
  1218. from all over the world. If you have a special interest in something,
  1219. then odds on there is a usenet group for it! Some of the groups
  1220. are "R to NA-17" in terms of rating, so select carefully, if some
  1221. things offend you. Net-Tamer does not know what you want, except what
  1222. you tell it to get.
  1223.  
  1224. To get messages from the usenet groups, you must have signed up for
  1225. internet access. To select a group, press the F3 key, like you were
  1226. going to view messages, but select option B. The screen will display
  1227. a menu asking you to add or delete a group. Since you don't have any
  1228. yet, pick A which is add. Next, enter the name of the group. Nettamer
  1229. lets you "browse" a list of the usenet groups. Suppose you decide for
  1230. example to keep up with alt.online-service. This is a group for all
  1231. the "commercial" services like service, etc. Type in the name of the
  1232. group. If the group is in the master list the program will include it
  1233. and add it to the menu, otherwise it will ask you if you are sure
  1234. about the name. I would menu drive this, but there are over 4000 such
  1235. groups!
  1236.  
  1237. ADDING A GROUP TO THE MENU DOES NOT AUTOMATICALLY GET MESSAGES. You
  1238. must then re-select the group from the menu and then select which
  1239. messages you want. The program will get any available message in
  1240. the way the screen describes. The only problem is that although
  1241. Net-Tamer will know message numbers, which were available, it will
  1242. not know the message subject. You can now request a list of subjects
  1243. for each message number, just like a group! Enter the message range
  1244. you are interested in and add the letter S. i.e. 1000S-1500 would
  1245. get a list of all messages in that range with the subject heading of
  1246. each. You can then work your way through the list, when the program
  1247. comes back from a run, and "toggle" select just the messages you want!
  1248. If you want detailed information (say you are considering downloading
  1249. a LARGE uuencode of a binary file) then you should use H, instead of
  1250. S. The letter H gets the entire header, but not the body of the
  1251. message. The headers are placed in the message files, so look there
  1252. for them, not in the usenet select section.
  1253.  
  1254. TEXT CAPTURE:
  1255.  
  1256. Hit alt + c to start a capture file in telnet.
  1257.  
  1258. OTHER Features. There are many more things that Net-Tamer will do.
  1259. I just can never think of them all at the same time<G>. If you don't
  1260. find it in the doc, ask anyway. Heck, even if it's not there you
  1261. may convince me to add it<G>.
  1262.  
  1263. SCRIPT FILES
  1264.  
  1265. These files are executed only during login!
  1266.  
  1267. The dialing scripts use two "macros" these are Password$ and
  1268. Username$ (or Address$). These send those pieces of information to
  1269. a service. Do not change those words, Net-Tamer knows what
  1270. the formation is and keys on this are to do certain things!
  1271.  
  1272.  Use:
  1273.  Blast PUSERNAME$
  1274.  Instead of:
  1275.  Blast USERNAME$
  1276.  
  1277.  if your service requires a P in front of your username. Most don't.
  1278.  Some services require something AFTER the Username, just edit the
  1279.  script this way:
  1280.  
  1281.  Blast Username$XXX
  1282.  
  1283.  The program will Replace Username$ with your username, add the
  1284.  XXX stuff and a <13>. Do not add <13> to Username$ and Password$
  1285.  in a script. The program adds these for you.
  1286.  
  1287. If you need to include an Ascii control character in a command,
  1288. just enter it like this <27>. (That would be the escape character.)
  1289. Net-Tamer DOES NOT ALLOW SPACES ON THE RIGHT OR LEFT HAND SIDE OF A
  1290. WAIT COMMAND. USE <32> to indicate a space. Spaces in the middle
  1291. of a statement are recognized. i.e. <32>NOW IS THE TIME<32> would
  1292. check for the text and a space on either side.
  1293.  
  1294.  Below is a modified script for an access site. Yours may or may not
  1295.  function in the same way. This is just a sample.
  1296.  
  1297.  WAIT gin:-OR-#600
  1298.  DELAY 10
  1299.  BLAST Username$
  1300.  WAIT word:
  1301.  DELAY 10
  1302.  BLAST Password$
  1303.  WAIT otocol:
  1304.  DELAY 10
  1305.  Blast PPP<13>
  1306.  DELAY 10
  1307.  PPP
  1308.  
  1309.  NOTE:
  1310.  The last PPP in the file is an internal command to the program to go into
  1311.  PPP mode.
  1312.  
  1313.  IF You don't get prompts on login, then that it the simplest script
  1314.  of all:
  1315.  DELAY 30
  1316.  PPP
  1317.  
  1318.  Read the scripting section. Also see the new stuff section about
  1319.  CHAP and PAP, if this fits your situation.
  1320.  
  1321. DELAY #-
  1322. This command pauses program execution for X tenths seconds
  1323. (decimals are not accepted). The incoming characters are still
  1324. checked.
  1325.  
  1326. example: DELAY 15 (wait 1.5 seconds)
  1327.  
  1328. WAIT TEXT-OR-TEXT-OR-TEXT -
  1329. OR
  1330. WAIT TEXT-OR-TEXT-OR-#12345
  1331.  
  1332. This command tells Net-Tamer to check the incoming characters from
  1333. service until the TEXT information is received. The -OR- is optional.
  1334. If you specify -OR- (max two) the program will resume
  1335. execution when it receives the characters matching any command
  1336. specified by TEXT. The maximum length of TEXT is 40 characters. You
  1337. may also say wait BILL-OR-#120. The number preceded by the #
  1338. character indicates the maximum length of time to wait. The number
  1339. is 1/10ths of a second.
  1340.  
  1341. If the time is up, before the program reaches the text, then the
  1342. script is abandoned. If a wait statement is not successful and you
  1343. have not specified a time, Net-Tamer abandons the script in 7 seconds
  1344. on a *.LOG file. <32> below represents a space character.
  1345.  
  1346. Example: WAIT MAIL><32>:-or-TO:<32><32>
  1347.  
  1348. Add /NOERROR, if you do not wish the script to end, if the text is
  1349. not found in the specified time.
  1350.  
  1351. BLAST TEXT<13>
  1352. This command tells the program to send the characters in text. If
  1353. the <13> command is included, the program sends ASCII 13 or enter.
  1354. Example:  Blast READ WAITING NS<13>
  1355.  
  1356. IF TEXT -
  1357. or
  1358. IF NOT TEXT
  1359.  
  1360. END IF -
  1361. Tells Net-Tamer to compare the current state of incoming data for
  1362. service with TEXT. If the TEXT condition is true, then Net-Tamer
  1363. proceeds otherwise, it skips to the end of the END IF.  The NOT
  1364. statement REVERSES this. The statements are executed only if the
  1365. TEXT is not the situation.
  1366.  
  1367. STATIC ###.###.###.### -
  1368.  
  1369. STATIC 206.14.56.13 in the script at any time before the PPP
  1370. command, would tell the program to assume that as your static IP address.
  1371. This is seldom needed. The most likely use would be a direct
  1372. serial port connection to network, and not over a modem.
  1373.  
  1374. PPP -
  1375. This ends the service#.log file and tells the program to go to PPP
  1376. mode. YOU MUST INCLUDE THIS COMMAND AT THE END OF THE SCRIPT!
  1377.  
  1378.  
  1379. USERNAME$ and PASSWORD$ - These are instructions to the program
  1380. to insert your Username or Password in this spot in the script.
  1381. DO NOT INCLUDE A <13> with these commands. For example:
  1382.  
  1383. BLAST USERNAME$
  1384.  
  1385. Will send your username and a <13>.
  1386.  
  1387. You may also use these commands, even if other information is
  1388. needed in the login. For example, CRIS.COM uses USERNAME$PPP
  1389. to tell the service that you want a PPP connect. Netcom.com uses
  1390. #USERNAME$ for the same reason. Again, no <13> is required.
  1391.  
  1392.           ****MACROS*****
  1393.  
  1394. You may assign a macro to your signature. In the signature line
  1395. of set up just type #M and the macro number to assign to your
  1396. signature. A signature allows two lines, but if you want more,
  1397. just use a text editor and create a file named MACRO. and a number.
  1398.  
  1399. For example, if you want to assign file macro.2 to your signature,
  1400. just enter #M2 in the signature line. THIS IS CASE SENSITIVE
  1401. (small m won't do).
  1402.  
  1403. (Please note: the pound sign and capital M tell Net-tamer to insert a
  1404. macro. You must also give the macro file number.)
  1405.  
  1406. Macro files must be named MACRO.## (the word macro, followed by
  1407. a number up to 50) and be located in the message directory.
  1408.  
  1409. You may also assign a macro to a telephone number. This is useful
  1410. when you need something longer than the program has room for in
  1411. the telephone number box.
  1412.  
  1413.  
  1414. Net-Tamer ERROR MESSAGES
  1415.  
  1416. Net-Tamer displays a number for all internal errors. In most cases,
  1417. you can tell the program to continue despite the error. If an error
  1418. persists or you do not see the error message displayed on this list,
  1419. please contact me with the circumstances.
  1420.  
  1421. 3 RETURN error.
  1422.  
  1423. The program has lost it's memory pointers. This is never a first error,
  1424. but can be caused if there were two errors in a row.
  1425.  
  1426. 5 Illegal function call
  1427.  
  1428. This is usually caused by a conflict with a monitor, or a multiple
  1429. or repeated error. Check your setup for correct file and path names
  1430. and be sure that you did not use an illegal character in a file name
  1431. for usenet.
  1432.  
  1433. 6 Overflow
  1434.  
  1435. Net-Tamer was trying to read a message number, that went over
  1436. 2,000,000,000. Since usenet messages don't go that high, then line
  1437. noise was the likely problem. If you cannot get past the error, then
  1438. delete the messages and re-download.
  1439.  
  1440. 7 Out of memory
  1441.  
  1442. Your computer does not have enough free memory to sort all the
  1443. messages you are trying to read. That is okay. Press F5 to get back
  1444. to the messages. The program will start indexing again, from where
  1445. it left off. There will be no sort of the first however many
  1446. messages, however.
  1447.  
  1448. 9 Memory over load!
  1449.  
  1450. Net-Tamer uses the low 640k of DOS memory, so do not confuse
  1451. this with disk storage space or high memory. It will use some
  1452. EMS or XMS, if it finds this, but like most DOS programs, it
  1453. likes the low stuff<G>. Drop me a note, if you help in learning
  1454. to configure memory.
  1455.  
  1456. 11 Division By ZERO.
  1457.  
  1458. (Don't ask me how, my math teacher said it wasn't possible<G>.)
  1459.  
  1460. 14 Out of string space
  1461.  
  1462. Same as 7.
  1463.  
  1464. 17 Cannot continue
  1465.  
  1466. A Dos error. Leave the program, re-boot and try again<G>.
  1467.  
  1468. 24 Device time out
  1469.  
  1470. (printer, modem, or drive is not working.)
  1471. 25 Device fault          ""
  1472. 27 Out of paper          ""
  1473.  
  1474. 51 Internal Error
  1475. Same as 17.
  1476.  
  1477. 52 Bad file name
  1478.  
  1479. 53 File NOT found
  1480.  
  1481. 55 File already open
  1482.  
  1483. There was a file name which has caused a problem. This is usually
  1484. due to an incorrect group name. Delete your groups and reinstall
  1485. them.
  1486.  
  1487. 57 Device I/O error
  1488. Same as 24.
  1489.  
  1490. 58 File already exists
  1491. Same as 52 - 55
  1492.  
  1493. 59 Bad record
  1494. This is an index file error delete the *.IEX file for that group.
  1495.  
  1496. 61 Disk full
  1497. Your floppy or hard disk has over flowed<G>.
  1498.  
  1499.  
  1500. 62 Input past end of file
  1501. Same as 59
  1502.  
  1503. 63 Bad file number
  1504. 64 Bad file name
  1505.  
  1506. If on line then this is a group set up error. In the message
  1507. viewer, they are index file errors.
  1508.  
  1509.  
  1510. 67 To many files
  1511.  
  1512. Up the number of FILES= in your config.sys file.
  1513.  
  1514. 68 Device unavailable
  1515.  
  1516. see 24
  1517.  
  1518. 71 Disk NOT ready
  1519.  
  1520. Your floppy drive door is not closed or there is a problem with
  1521. a hard drive sector. Run SCANDISK and check this out.
  1522.  
  1523. 72 Disk media error
  1524.  
  1525. The disk is unformatted<G>.
  1526.  
  1527. 75 File access error
  1528.  
  1529. This is usually an error involving share.exe or another "TSR"
  1530. program. Please write me with the specifics if you cannot resolve
  1531. this on your own.
  1532.  
  1533. 76 Path NOT found.
  1534.  
  1535. You have found a way to tell Net-Tamer to look for a file in a
  1536. directory or drive that does not exist<G>.
  1537.  
  1538. 99 File is not intact or has been tampered with.
  1539.  
  1540. The program checks itself for any sign of tampering. This prevents
  1541. the spread of viruses. The error does not mean that you necessarily
  1542. have a virus, just that the program is not the same as the one
  1543. that was in the original archive file. The program has been corrupted
  1544. in some manner, however. You can no longer use pklite, or similar
  1545. software on net-tamer. Sorry about this, but in this day and age
  1546. safety is important. If you absolutely have to have a compressed
  1547. version, then let me know and we can work something out. THIS ONLY
  1548. APPLIES TO THE 386 AND HIGHER VERSION. The older computers are
  1549. slow enough to load the program as it is and palm top users often
  1550. want to use PKLITE on the program.
  1551.  
  1552. Internal error, means a conflict has arise with DOS. This is not a
  1553. Net-Tamer error. A re-boot is required. Shut down and restart the
  1554. program.
  1555.  
  1556. I hope you don't see any of these! If you do, try hitting the
  1557. famous Any Key first. If that doesn't cure the situation, then exit
  1558. Net-Tamer and try again. If that doesn't cure the problem, please leave
  1559. me a note in the  group or in email.
  1560.  
  1561. *****Net-Tamer FILE NAMES*****
  1562. See the note about palm top minimum files, if you want to use
  1563. the minimum disk space.
  1564.  
  1565. NetTamer.exe - the main file
  1566.  
  1567. reader.exe - Setup and message viewer program.  Nettamer and
  1568. reader "chain" back and forth and must be in the same directory.
  1569.  
  1570. G&S.EXE - The Net-Tamer sound and graphics player. Net-tamer uses
  1571. this for sound for the included 8 bit sound files.If you download
  1572. a *.WAV, *.AU,*.VOC,*.SND,OR *.MOD file, then Net-Tamer will call
  1573. PLANY.EXE if it is found in the main directory. This will also
  1574. show a *.gif file or play a *.wav from the dos prompt. Type:
  1575. G&S filename.ext
  1576. Press enter to terminate viewing of a graphic. I hereby state that
  1577. this program is freeware and you may do with it as you please.
  1578.  
  1579. HTMFIX.EXE - This is a small utility to remove HTML headers from
  1580. binary file downloads via the WWW. Just type HTMFIX filename.ext
  1581. You probably need this utility anytime a download via the WWW
  1582. (such as a zip file) seems corrupted.
  1583.  
  1584. The 386 version of G&S is the only one which does sound.
  1585. The Palm top version will recognize a few key strokes, since the display
  1586. screen is smaller than VGA, you can HIT L (scan Left), R (Scan Right),
  1587. U (Scan Up), D (Scan Down), and Q (QUIT viewing).
  1588.  
  1589.  
  1590. PLANY.EXE - A VERY special thanks to BILL NEISIUS for allowing me
  1591. to include PLANY.EXE. This is a public domain program, but I'm
  1592. sure Bill would accept a contribution if you forced him<G>. Read
  1593. the plany.doc file for other uses besides Net-Tamer for this neat
  1594. little program. If it doesn't work, then be sure that you have
  1595. BLASTER= set in your environment. The same goes for G&S.EXE.
  1596.  
  1597. djpeg.exe - Based entirely on code provided by the Independent
  1598. JPEG GROUP. (I mainly compiled the program. Heck, I don't even read C)
  1599. See the jpgread.me file for the disclaimer. This is freeware.
  1600. Net-tamer calls this to djpeg, before it shows a graphics file.
  1601.  
  1602. RED.COM - a down and dirty text editor. The program is a minor
  1603. alteration of a public domain editor by DAVID NYE. I cannot locate
  1604. him to say thanks. Use your own editor, if you don't like it.
  1605.  
  1606. The red.com, djpeg.exe, plany.exe and g&s.exe files are freeware.
  1607. This applies to no other files included with this release. If you
  1608. use any of these with another program, you should give credit to
  1609. the author(s).
  1610.  
  1611. nettamer.doc - this file.
  1612.  
  1613. SERVICE1.LOG, SERVICE2.LOG, etc. - Log in scripts. You must usually
  1614. edit these.
  1615.  
  1616. *.DLU  - the message files. If you must edit these, please delete the
  1617. index files that go with them, before restarting the program.
  1618. *.IEX - The index files.
  1619. *.PRM - Archive files.
  1620. *.PEX - Archive index files
  1621. USENET.GET - Message request file for the next on line run. This
  1622. is deleted once the messages are retrieved.
  1623.  
  1624. FTP.GET - Same as usenet, but for FTP files to be retrieved during
  1625. auto run.
  1626.  
  1627. usenet.$##  - a reply file. You are allowed a maximum of 255 reply
  1628. messages or other outgoing files for usenet and 255 emails per trip.
  1629.  
  1630. MAIL.$##   - Same as above.
  1631.  
  1632. MAIL.SET - instructions about where to start getting email messages
  1633. from the server and which messages that are on the server to delete.
  1634. The program will not delete a message when it is first received, in
  1635. case it was messed up during download.
  1636.  
  1637. proxy.set - the file with the proxy server url, IF you declared one.
  1638.  
  1639. usenet.get - the file which tells the program which usenet messages
  1640. to get<G>.
  1641.  
  1642. USER.EZ    - the program registration file.
  1643.  
  1644. USENET.FOR - A list of usenet groups. May be updated from the Usenet
  1645. menu.
  1646.  
  1647. MUSIC.RNB  - the Net-Tamer songs file, used if you don't have a sound
  1648. card. THIS SHOULD BE PLACED IN THE MESSAGE DIRECTORY.
  1649.  
  1650. *.f16  - VGA Text mode fonts.
  1651.  
  1652. *.x16 - special "graphics fonts" used by the program. You may delete
  1653. all the *.F16 files, but should not delete the *.X16 files.
  1654. (The program will still work, but it won't look too nice at certain
  1655. spots.)
  1656.  
  1657. *.KEY - the help files.
  1658.  
  1659. *.RBG - Raw graphics files which are save only if you hit control S
  1660. to save a web page.
  1661. *.GIF - I leave the WWW gif files behind YOU HAVE TO DELETE THOSE.
  1662. *.T$$. *.W$$ - Some temporary files for parsing HTML. You should not see these
  1663.         unless              you aborted the program.
  1664.  
  1665. *.F$$ - FTP directories. These are temporary and should be deleted
  1666.         unless the program bombed or you hit F10 while in FTP.      
  1667.  
  1668.  And others that I likely forgot<G>.
  1669.  
  1670.                ****************
  1671.                *  TERMS       *
  1672.                ****************
  1673.  
  1674. DNS - Domain Name Server. Addresses on the internet are really numbers.
  1675.  People, however, have trouble remembering numbers, so we give things
  1676.  names. When you tell Net-Tamer or any internet program that you
  1677.  want to go to WWW.HOTPAGE.COM, the program calls the DNS server
  1678.  to find out what the current address is for that name (URL). Yes,
  1679.  the address can change from day to day or even minute to minute as
  1680.  a service switches things from computer to computer to do such things
  1681.  as maintenance.
  1682.  
  1683. SOCKET - A communications channel. When you see messages on the status
  1684.   line like "testing socket", the program is trying to contact the
  1685.   service that you have told it you want to use, or that it needs
  1686.   it for an auto-run.
  1687.  
  1688. URL - Uniform Resource Locator. The "name" of a service, but it can
  1689.  include a "path" to a particular web page or file on that service.
  1690.  
  1691. PACKET - This is a bunch of bytes of information. The "packet header"
  1692.   tells the internet and the local server where things are going
  1693.   and the program where something is from.
  1694.  
  1695. PORT - In addition to having an address, services have port numbers.
  1696.   Think of this like the extra four digits in an American Zip Code.
  1697.   The first 5 get you to the main area, then next 4 digits help the
  1698.   post office find the building. Most services use "well known"
  1699.   port numbers. Adding a colon and a number to the end of a URL
  1700.   indicates that this service uses a "non-standard" port number.
  1701.   Addresses on the net are four bytes and the ports add two more
  1702.   bytes to get the message to the final destination. Addresses
  1703.   are written as: 255.123.4.19 where the maximum number between
  1704.   the periods is 255. Ports are numbered 0 to 65535. Most of
  1705.   the "important" ports on the net have numbers smaller than
  1706.   255.
  1707.  
  1708. COMM PORT - That is the memory address that the program must know to
  1709.   "talk" to your modem.
  1710.  
  1711. IRQ - The "interrupt" that the modem uses to tell the program that it
  1712.  needs attention. Most COMM PORTS and IRQ's are "standard". They
  1713.  are used on most computers in "well known" pairs.
  1714.  
  1715. RFC's - Request For Comments. These are the "rules and regulations" for
  1716.  the internet in many cases. RFC compliant means that the service
  1717.  or the program accessing the service abides by the rules. Net-Tamer
  1718.  is RFC compliant for anything which applies to a "client".
  1719.  
  1720. CLIENT - A program that accesses a particular service.
  1721.  
  1722. SERVER - The computer that is home to a service.
  1723.  
  1724. PPP - Point to Point Protocol. There are many types of PPP. Net-Tamer
  1725.  handles the PPP variations necessary for comm port interface with
  1726.  a network.
  1727. CHAP - Challenge Handshake Authentication Protocol.
  1728.  
  1729. PAP - Password Authentication Protocol. Both PAP and CHAP are ways that
  1730. a user is identified on log in to a service, if the service does
  1731. not use "prompts" for this.
  1732.  
  1733.                         *****************
  1734.                         *TECHNICAL STUFF*
  1735.                         *****************
  1736. Speed -
  1737.    The online speed of Net-Tamer is determined by many factors.
  1738.    The speed of the net at the moment, how far away the server
  1739.    being dealt with at the moment is, whether or not your modem
  1740.    does compression, the type of file you are downloading and your
  1741.    connect speed.
  1742.  
  1743.    If you have a "clean connection" to a local server, such as usenet,
  1744.    then the program SHOULD download messages at rates running from the
  1745.    high 1400's to 2000+ Characters Per Second at 14.4 connect speeds.
  1746.    Upload to a server will be slower. I typically get 1100 CPS when I
  1747.    upload. This is because the program waits to send the next "block" of
  1748.    data, until the server acknowledges the receipt of the last block.
  1749.  
  1750.    If you are uploading a big uuencoded file to mail or usenet, this
  1751.    will look a lot slower than it is. Each "tick" you see on the screen
  1752.    is over 1,000 characters sent in most cases. If you telnet to a
  1753.    BBS, then use XMODEM CRC or YMODEM to download a file, you should
  1754.    get about 900 + CPS at 14.4. This is much slower than FTP. Because
  1755.    these protocols add extra overhead on the protocols already being used
  1756.    for telnet, PPP, TCP, and IP.
  1757.  
  1758.    Speeds given by the program are, if anything, a bit slower than
  1759.    the actual speed. I will challenge any other program to a download
  1760.    race, all factors but the programs being equal.
  1761.  
  1762.     Other things which will slow down Net-Tamer:
  1763.     The provider does frequent "pings" of the user: This means that the
  1764.     provider keeps sending packets every few seconds which the program
  1765.     must respond to, or be logged off.
  1766.  
  1767.     The service is overloaded: This does happen, especially if it is
  1768.     during a period when there are a lot of users on line.
  1769.  
  1770.     The user is calling a service which is many hops away on the net:
  1771.     You can find out the relative time to a url by using PING in the program.
  1772.  
  1773.     The connect rate to the service is less than the modem is capable of:
  1774.     Check the baud rate in setup and be sure that it is set correctly.
  1775.     For 14,400 modems, set to 19,200 - 57,600. For 28.8 modems, set to
  1776.     115200. Also be sure connect negotiation is enabled, so that the modem
  1777.     gets the best "deal" when it calls in.
  1778.  
  1779.      The line you are calling to or from is "dirty": This is the case, if
  1780.      the connect rate is always at odd speeds. For example you have a 28.8
  1781.      modem, but connect at 20000 baud or have a 14.4 but connect at something
  1782.      less than 19200.
  1783.  
  1784.  
  1785. Debugging -
  1786.    There is an alt command to capture ALL packets sent by and
  1787.    received by the program. Hit alt + F5. There will be no
  1788.    acknowledgement by the program that you have hit that key combination
  1789.    and a second press of alt + F5 ends capture.
  1790.  
  1791.    Captured packets are placed in the PACKETS.CAP file. The program
  1792.    normally only puts "strays" in that file, as per the RFC directive
  1793.    to "log unusual events". Do not run capturing packets all the time,
  1794.    since this really slows things down. There are NO packet capture
  1795.    routines in the XT and Palm top version. Those machines have enough
  1796.    on their minds<G>.
  1797.  
  1798. Ports -
  1799.    The program assumes the "well known" port for a service, unless
  1800.    the user indicates otherwise. The Net-Tamer main port is 3292
  1801.    (hex 0CDC). The program rotates port numbers in the FTP data
  1802.    download and upload section. The low byte of that port number is
  1803.    always 20 and the high byte rotates from 0 to 127 in a circle.
  1804.  
  1805. Buffer -
  1806.    Net-Tamer can handle packet sizes up to 2048 bytes or "octets"
  1807.    in net-speak. The program's total buffer size is 16k with a
  1808.    small "fudge factor".  The PPP-LCP negotiations determine the
  1809.    Maximum packet size for send and receive, but many services
  1810.    will not send a packet at that maximum size. Net-Tamer will
  1811.    always send at the maximum permitted segment size.
  1812.  
  1813.    ****************************************************
  1814.    *WHAT MAKES NETTAMER DIFFERENT FROM OTHER PROGRAMS?*
  1815.    ****************************************************
  1816.  
  1817. I am often asked this question and while I try to answer, I am often
  1818. not complete enough in email. So here are the "technical" differences.
  1819.  
  1820.              ---UNIFIED PACKET SERVICES (UPS)---
  1821.  
  1822. When I first started to contemplate writing an internet program, I
  1823. made two assumptions:
  1824. 1) That the program was to be used over a comm port.
  1825. 2) That the user would have their own IP address and that it only
  1826. needs to talk to a network and not be part of a network.
  1827.  
  1828. Assumption one has to do with how the program addresses the net
  1829. and that can be changed by me if I ever get the information about
  1830. various network cards and protocols, but assumption 2 is critical.
  1831. It says that the program is the compete end network on the internet
  1832. as far as the user is concerned. You see most programs use 3 or
  1833. more "packet drivers" to achieve internet connection. The internet
  1834. is technically a network of networks, so there are two main protocols
  1835. involved. IP which gets the information across the internet and
  1836. TCP which allows the data to be directed at a particular service
  1837. or "process" on the end network. The IP address in the IP packet
  1838. gets it to the network that you are calling and the TCP tells
  1839. the network which service (port number) on the network that
  1840. the data is directed to. PPP comes into play when you need to
  1841. send data to another network, so that you can tell it what to
  1842. do with the TCP/IP packets that you are sending to it. So a
  1843. "traditional" internet program works like this:
  1844. [1] the program on your PC
  1845. [2] TCP driver on your PC
  1846. [3] IP driver on your PC
  1847. [4] PPP driver on your PC
  1848. [5] modem driver on your PC
  1849. [6] connection to the internet provider (i.e.) the modem.
  1850.  
  1851. To send:
  1852. [1] calls [2] which calls [3] which calls [4] which calls [5]
  1853. which calls [6].
  1854.  
  1855. To receive:
  1856. [6] calls [5] which calls [4] which calls [3] which calls [2]
  1857. which calls [1].
  1858.  
  1859. In essence, there can be 5 programs operating to send data!
  1860.  
  1861. This stuck me as odd. It works well on a "true" network, where
  1862. services or processes can be on different machines, but it reeks
  1863. when there is only one machine. The data from the first 5 programs
  1864. needs to be sent to the modem, but 5 programs do not have to be
  1865. involved, only one!
  1866.  
  1867. Nettamer is all 5 programs in one. When the program needs
  1868. to send information, it makes up all 3 "packet headers" in
  1869. place, does not move the data in memory, then calls the modem
  1870. with that information. The routine which sends the data is
  1871. only passed a memory pointer to the data and then sends the
  1872. data out of the comm port by simply incrementing the pointer and
  1873. grabbing a byte at a time. The data is moved in memory only
  1874. once not 5 times.
  1875.  
  1876. To receive data the ISR (interrupt service routine) grabs a
  1877. byte from the comm port, checks to see if it is a control
  1878. character, moves it to a buffer, updates a CRC (numerical
  1879. check of data accuracy and then terminates. When that routine
  1880. determines that a complete packet has been received, it sets a
  1881. pointer with information about the packet size and location.
  1882. Another routine in the program "peeks" to see if a packet is
  1883. ready and then "strips" the leading packet information, if it
  1884. is ready. By strips, I do not mean that the packet is moved.
  1885. The program does the checks with the packet still in the
  1886. same place in the comm buffer. Once it determines that
  1887. the packet is correct and in order, THEN it moves the
  1888. data to leave space for another packet. Again, the data is
  1889. moved only once and not 5 times. That in a nutshell is how UPS
  1890. works.
  1891.  
  1892. While this approach is fast, it does have one draw back. Net-Tamer 
  1893. cannot work (as it is written) with another packet protocol. This
  1894. makes the program inflexible. If a user wants to access the internet
  1895. over an ethernet connection or other network protocol, nettamer will
  1896. not do it. I can add such routines, but if I do so, that will become
  1897. a separate program and dedicated to the system that it is used on.
  1898.  
  1899.               *******************************
  1900.               *Some Suggested Init Strings  *
  1901.               *******************************
  1902.  
  1903. Thanks to hbj@enterprise.net here are some suggested modem init strings.
  1904.  
  1905. Generic/UNKNOWN Modem-AT&F^MAT&C1&D2&S1&K3
  1906. Generic Modem (9600 baud+)-AT&F^MATX3&C1&D2&S1&K3
  1907. Hayes Optima/Ultra compatible (14400)-AT&Q0&C1&D2&K3&S1
  1908. Use Factory Settings-AT&F
  1909. Use Profile Stored in Modem-ATZ
  1910. Amberlogic Mistral-ATF7N0&E0&K5&C1&D2&S1
  1911. Amstrad PC Modem-AT&C1&D2&S1
  1912. Amstrad SM2400-AT&C1&D2&S1
  1913. Anchor Signalman Lightning 24-AT&C1&D2&S1
  1914. Anchor 2400E-AT&C1&D2&S1
  1915. Anchor 96E4-ATX4\N3\V1%C0\Q3
  1916. ATI 2400/ETC MNP-AT&C1&D2&K3&S1
  1917. ATI 9600 ETC-ATX4&Q0&C1&D2&K3&S1
  1918. AT&T 4000-ATX4F1&C1&D2&S1
  1919. AT&T 4024-ATX1&C1&D2&S1
  1920. Avatex modems-AT&C1&D2&S1
  1921. Best Data Smart One 2400-ATE1X3&Q0&C1&D2&S1
  1922. Black Box 2400-AT&Q0&C1&D2&S1
  1923. Boca M2400E-AT&C1&D2&K3&S1
  1924. Boca M2400I-AT&C1&D2&K3&S1
  1925. Boca Fax Modem FM9624-AT&C1&D2&K3&S1
  1926. Boca 14.4-AT&C1&D2&K3&S1
  1927. BT V.32-ATE1&EO&K0&M
  1928. Cardinal 9600/V32-AT&M1&C1&D2&H1&I1&S1
  1929. Cardinal MVP24I/MVP24IF-AT&C1&D2&S1
  1930. Cardinal MNP 2400-AT&H2&I2&M0&C1&D2&S1
  1931. Cardinal V.42bis 2400-AT&M0&K4&C1&D2&S1
  1932. Cardinal 9600/V32-AT&M0&C1&D2&S1
  1933. Cardinal 14400-AT&M1&C1&D2&K3&S1
  1934. CMS-AT\N1Q0V1&C1&D2&S1
  1935. Complete Communicator Gold-AT&C1&D2&K3&S1
  1936. Complete PC 2400-ATE1X4&C1&D2&S1
  1937. Compucom Speedmodem 2400-ATX1\N0&C1&D2&S1
  1938. Compudyne 2400-ATX2\N0&C1&D2&S1
  1939. Compudyne 9642/V32-AT&Q0&C1&D2&S1
  1940. CTS 2424ADH PLUS-ATX4
  1941. CTS 2424CTSSM06-AT&C1&D2&S1
  1942. Dataflex Comfax II-ATX1\N0%C0&Q0&C1&D2&K3&S1
  1943. Dataflex Dynalink-ATB0&C1&D2&K3&S1
  1944. Dataflex Quadcom-AT&D2%C0S37=59&C1&S1
  1945. Dataflex Rapier+ V32Bis - UK-AT&D2%C0&C1&K3&S1
  1946. Digicom Eagle Plus-AT*E0*F1&C1&D2&S1
  1947. Digicom 9624LE-AT&M0*E0*F1&C1&D2&S1
  1948. Digicom Scout-AT*E0*F3&C1&D2&S1
  1949. Digicom Scout 14.4 Fax-AT*F0*E0&C1&D2&S1
  1950. Digicom 9624LE-AT&M1*E0*F3&C1&D2&S1
  1951. Digicom Scout 14.4 Fax-AT*F3*E0&C1&D2&S1
  1952. Digitan HI-IQ DS-24 - ATQ0V1\Z1&C1&D2&S1
  1953. Dowty Jaguar Quartet L-ATE1&C1&D2&S1
  1954. Dowty Mayze-AT&C1&D2&S1
  1955. Dowty Quantum 96-AT&E0%C0S7=60&C1&D2&S1
  1956. Dowty Quattro SB2422-ATE1X1&E0&C1&D2&S1
  1957. Dowty Quattro 96-ATE1%K0&C1&D2&S1
  1958. Everex Evercom 24E MNP-ATX4\N0\Q1&C1&D2&S1
  1959. Everex Evercom II-24 PS/2-ATX4&C1&D2&S1
  1960. Everex EverFax 2496E-AT%C0
  1961. Falcom FCM2400-ATX6&C1&D2&S1
  1962. Galaxy Pioneer V.22/42-ATX4\N0&C1&D2&S1
  1963. Gateway 2000 Internal-AT&Q0&C1&D2&K3&S1
  1964. Gateway 2000 Nomad 14400-AT&Q0&C1&D2\Q3&S1
  1965. Gateway Telepath-AT&Q0\G1&C1&D2&S1
  1966. Hayes Accura-AT&C1&D2S110=1&S1
  1967. IBM Mwave Modem 14400-AT&C1&D2\Q3&S1
  1968. Info Runner VP9624-AT%C0&C1&D2&S1
  1969. Intel 9600 EX-AT\N0\Q3%C0&C1&D2&S1
  1970. Intel 14.4 (V.32bis)-AT\N0\Q3&C1&D2&S1
  1971. Intel High Speed Faxmodem-AT\N0\Q3&C1&D2&S1
  1972. Intel PCMCIA Faxmodem Rel 2-AT\N0\Q3&C1&D2&S1
  1973. Intel PCMCIA Faxmodem Rel 3-AT\N0&R1&C1&D2&S1
  1974. Intel SatisFAXtion-ATX4\J0\N0\V1%C0&C1&D2&S1
  1975. Intel SatisFAXtion 400e-AT&F\Q3\N0%C0&C1&D2&S1
  1976. Laser 2400-ATX2&C1&D2&S1
  1977. LightCom 14.4F-AT&D2%C0&C1&D2&S1
  1978. Lightspeed 2400LE-ATX4\N3\J0\Q3\V1%C0&C1&D2&S1
  1979. Master Systems Turbo-AT&D2&C1&S1
  1980. Megahertz-AT\N0&K4&C1&D2&S1
  1981. Megahertz (Rockwell command set)-AT&C1&D2&K3&S1
  1982. Megahertz (Sierra command set)-AT&C1&D2\Q3&S1
  1983. Megahertz (-AT&T command set)-AT&C1&D2\Q3&S1
  1984. Microcom DeskPorte ES Series-AT&C1&D2&K3&S1
  1985. Microcom QX4232hs-AT&C1&D2\Q3&S1
  1986. Microcom AX2400-AT&C1&D2&S1
  1987. Migent Pocket Modem (1200)-ATX1&C1&D2&S1
  1988. Miracom Courier HST-ATS7=58X6&B1&H1&R2&C1&D2&S1
  1989. Miracom Courier V32bis-ATS7=58X6&B1&H1&R2&C1&D2&S1
  1990. Motorola Codex 3260-AT&K0&N0&Q0*SM0*FL1&C1&D2&S1
  1991. Motorola UDS-AT\N0\C0\J0\Q1&C1&D2&S1
  1992. MultiTech MultiModem 224-AT&C1&D2&E1&E4&S1
  1993. MultiTech MultiModem V.32-AT&C1&D2X4&E1&E4&S1
  1994. Multitech Modem II MT1432-ATE1|&F&C1&D2&E1&E4&S1
  1995. NEC Laptop-AT&C1&D2\K0\Q3%C1&S1
  1996. Nokia Cellular Data Card-AT&F
  1997. Nokia Cellular Data Card (Cellnet)-ATS35=6
  1998. Nokia Cellular Data Card (Orange)-ATS34=2S35=6
  1999. Nokia Cellular Data Card (Vodafone)-ATS34=2S35=6
  2000. Okitel 9600-AT\V1\N3X4&B0&K0S27=128&C1&D2&S1
  2001. Pace-ATE1S53=2&C1&D2&S1
  2002. Pace Eurolink-ATE1S53=2&C1&D2&S1
  2003. Pace Linnet FX-AT&C1&D2&S1
  2004. Pace Linnet V.32 Quad-AT&K4\P1F6&C1&D2&S1
  2005. Pace Microlin-AT\N0%C0&C1&D2&S1
  2006. Pace V.32-AT&D2&K2\P0&C1&D2&S1
  2007. Penril Alliance-AT&C1&D2&S1\Q1,1
  2008. Practical Periph. PM2400-AT&C1&D2&S1
  2009. Practical Periph. PM2400 MNP-AT&C1&D2&S1
  2010. Practical Periph. PM9600 V.32-AT&C1&D2&K3&S1
  2011. Practical Periph. 14.4 Fax-AT&C1&D2&K3&S1
  2012. Prometheus 2400G,MNP-ATX4\N0\Q0\S0
  2013. Prometheus Home Office Fax Modem-AT&C1&D2&S1
  2014. Prometheus Promodem 9.6-AT*F2&C1&D2&S1
  2015. Prometheus Ultima 9600-AT\N0\Q0\J0&C1&D2&S1
  2016. Psion Dacom Gold Card V34 + Fax-ATX3L1
  2017. Psion Dacom Meteor 14.4-ATL1X3
  2018. Psion Dacom Quad-ATB0F3&K1V1E1Q0&C1&D2&S1
  2019. Quickcom V.32-AT*E0*F1&C1&D2&S1
  2020. Racal Maxam V+-AT&E0\C4&D2X1&C1&S1
  2021. Shiva-AT&M0&D2&C1&S1
  2022. SupraModem 2400-AT&C1&D2&S1
  2023. Supra Fax Modem 9600-AT&C1&D2&K3&S1
  2024. Supra Fax Modem (UK)-AT&K4\N0%C0X0&C1&D2&S1
  2025. SupraModem 14.4-AT&C1&D2&K3&S1
  2026. Swan 24/96 Fax Modem-AT\N0&C1&D2&S1
  2027. Tandata TM500-AT&D2E1X1&C1&S1
  2028. Tandy 25-3532-AT-K0&K4\N0%C0&C1&D2&S1
  2029. Telebit Other-ATS58=2S68=2&D2&C1&S1
  2030. Telebit Qblazer-ATS58=2S68=2&D2&C1&S1
  2031. Telebit T1000-AT&Q0&C1S58=2S68=2&D2&S1
  2032. Telebit T1600-AT&C1S58=2S68=2&D2&S1
  2033. Telebit T2500-ATS58=2S68=2S95=0X4&C1&D2&S1
  2034. Telebit Trailblazer Plus-ATS63=2S95=0S96=0S97=0S98=0^MATX4&C1&D2&S1S58=2S68=2
  2035. Telebit WorldBlazer-ATS58=2S68=2&D2&C1&S1
  2036. Toshiba 1600-ATX4&C1&D2&S1
  2037. Toshiba Advanced V.32bis-ATX3L1
  2038. Trusts  1414-AT&FN0&N0&D2&C1&S1
  2039. Tricom Business Administrator-AT&C1&D2&S1
  2040. Tricom Tempest Quin-ATE1&C1&D2&S1
  2041. Tricom Tornado 5/42-AT&C1&D2&S1
  2042. Tricom Tornado 12/42-AT%C0\N4&C1&D2&S1
  2043. Twincom 24/96 Fax-AT&Q0&C1&D2&S1
  2044. Twincom 96/42I-AT\N0&K4&C1&D2&S1
  2045. Twincom 14.4 Fax Modem-AT\N0&K4&C1&D2&S1
  2046. US Robotics 2400-AT&C1&D2&S1
  2047. US Robotics Courier V32bis-ATS7=58X6&B1&H1&R2&C1&D2&S1
  2048. US Robotics Courier V34 models-AT&P1&G2
  2049. US Robotics Dual Standard-ATB0&B1&H1&R2&R2F1&C1&D2&S1
  2050. USR Sportster 9600-AT&B1&H1&R2&C1&D2&S1
  2051. USR Sportster Fax 14400-AT&B1&H1&R2&C1&D2&S1
  2052. UST 9600-ATB0&A3&B1&K3&N0&C1&D2&S1
  2053. VIVA 9600/9642E-AT\N0&K4&C1&D2&S1
  2054. VIVA 14.4 Fax-AT&C1&D2&S1
  2055. Wang-AT&M0&C1&D2&S1
  2056. Winfast V.32bis-AT&K4E1*E0&C1&D2&S1
  2057. Worldport 2496-AT&C1&D2&S1
  2058. WS3000 II-ATX5&I1\N0%C0&C1&D2&S1
  2059. Zenith Quad-ATB0&D2X2&C1&S1
  2060. Zoom 96/24 Fax Modem-AT&C1&D2&K3&S1
  2061. Zoom 2400 V.42bis-AT&C1&D2&K3&S1
  2062. Zoom 9600-AT&C1&D2&K3&S1
  2063. Zoom 96/24 Fax Modem-AT\N0&K4&C1&D2&S1
  2064. Zoom 14.4/28.8-
  2065. ATQ0V1E1W1&D2S95=47X4^MATS37=11N1&K3S82=128^MAT&Q5S36=7S46=138S38=1
  2066.  
  2067.  
  2068.                 ******************************
  2069.                 *SCRIPTS FOR VARIOUS SERVICES*
  2070.                 ******************************
  2071.  
  2072. I will be happy to include the login script for any service. Just
  2073. forward it to me and tell me to put it in the nettamer.doc file.
  2074. DO NOT CHANGE THE Username$ and Password$ macros in these scripts to
  2075. your real username or password. You gave those to the program in setup
  2076. and it knows what they are.
  2077.  
  2078. ***DELPHI SETTINGS***** (Delphi uses SLiRP on tymnet and sprint net.
  2079. pop3 url: pop.delphi.com
  2080. smtp url: smtp.delphi.com
  2081. nntp url: news.delphi.com
  2082. DNS  Add: 10.0.2.3
  2083.  
  2084. DELPHI TYMNET NUMBERS use tymnet.log in the archive file.
  2085.  
  2086. DELPHI SPRINT NET NUMBERS use sprint.log in the archive file.
  2087. Use Delphi28.log, if you login via a local connect or Delphix.log,
  2088. for everything else. If you use anything besides SLiRP, you will
  2089. need to ask Customer service for the DNS addresses for these
  2090. logins.
  2091.  
  2092.  
  2093. ____COMPUSERVE_____________
  2094. CIS1.log and CIS2.LOG
  2095. If you use a TRANSPAC connection look at CIS3.LOG
  2096.  
  2097. DNS Address:149.174.211.5,149.174.213.5
  2098. POP3: mail.compuserve.com
  2099. SMTP: mail.compuserve.com
  2100. NNTP: news.compuserve.com
  2101.  
  2102. ---CRIS.COM-----------
  2103. CRIS.LOG
  2104. _________sympatico (Canada)________
  2105.  
  2106. service2.log
  2107.  
  2108. contact person:
  2109. Gary_Jacek@bctel.ca
  2110. gjacek@freenet.vancouver.bc.ca
  2111.  
  2112. ----Script for Idirect (Toronto, Ontario Canada)
  2113. idirect.log
  2114.  
  2115. ---- Netcom.com-------
  2116. netcom.log
  2117. -----maltanet.omnes.net----- (Malta, Europe)
  2118. malta.log
  2119. _____________________________
  2120. ---EROLS.COM---- (American East Coast)
  2121. erols.log
  2122. -----------------
  2123.  
  2124. ---demon.co.uk----
  2125. demon.log
  2126. ------------------
  2127. ----sprynet------
  2128. spry.log
  2129. ------------------
  2130. ----datax-j (germany)----
  2131. dataxj.log
  2132. ---------------------
  2133.  
  2134. ----IBM.NET--------- (World Wide)
  2135. Usually the default service1.log file should work. If it doesn't see
  2136. the hints from users letters for a tip.
  2137. _________________________________________________________________
  2138.  
  2139.            ****************************
  2140.            * OTHER NET-TAMER SOFTWARE *
  2141.            ****************************
  2142.  
  2143. I am pleased to announce the following software releases for sale to 
  2144. developers. These are not shareware programs, and they do not
  2145. come with pretty wrappers or long and detailed documentation. They are
  2146. intended as demonstrations of what sort of custom applications are
  2147. possible. Drop an email to nettamer@cei.net and I'll give you a
  2148. URL to download a demo-version.
  2149.  
  2150. Agent Upload - This is an automated FTP upload program. What
  2151. makes it really unique, is that it will run in 100k of memory
  2152. on any 80XXX machine which supports DOS or a DOS window, a modem,
  2153. and an internet connection. It can be used for such tasks as
  2154. automated web page updates (for example, the latest scores from
  2155. your favorite sport). This was originally written for an insurance
  2156. company, but I have since expanded the program. It can be automated
  2157. to upload files from any directory on your hard drive and zip them,
  2158. before sending them, if required. The file size is under 56k.
  2159.  
  2160.  
  2161. Net-Mail PRO- This is designed to be hooked to other applications,
  2162. where a programmer needs to be able to send and receive volumes of
  2163. email. It can be called with at TSR timer, or from another program.
  2164. It will do an automatic uuencode and/or uudecode of binary files
  2165. declared in a messages and has bulk email "BLINDCC" ability from a
  2166. single orginal message. Call during business hours for a discussion
  2167. of rates and technical details. If you write custom business applications,
  2168. these programs are for you.
  2169.  
  2170.  
  2171.            *************************************
  2172.            * PGP Public Key for David Colston! *
  2173.            *************************************
  2174.  
  2175. -----BEGIN PGP PUBLIC KEY BLOCK-----
  2176. Version: 2.3
  2177.  
  2178. mQCNAi9BIPsAAAEEAJ3wgk5EGZT4wkXgd1fY8zKBEZQLKf0HI6PcRY1dwbU2mNOe
  2179. z/0ekPKCTL/96psqfw6i12DcBsP/FJoS8/l3r/ZPsZpsYSSTwZ72WqPTJTGEbpNb
  2180. qODhqMV+9n+4zOp++7szse/LKV5wRIrg9zrHIqwDN/jW87AjG1KNztOsCfmNAAUR
  2181. tA1EYXZpZCBDb2xzdG9u
  2182. =usNy
  2183. -----END PGP PUBLIC KEY BLOCK-----
  2184.  
  2185.             ********************************************
  2186.             *How to subscribe to the NETTAMER Mailing List*
  2187.  
  2188.             ********************************************
  2189. To subscribe to nettamer-l list serve send a message to:
  2190. nettamer-request@pop.ademco.com
  2191. In the body of the message include the word:
  2192. subscribe
  2193.  
  2194.                ***********************
  2195.                *TIPS/NOTES FROM USERS*
  2196.                ***********************
  2197.  
  2198. FROM: tb@tbrown.lvlham.lincoln.ac.nz
  2199.  
  2200. You can use the following simple dos batch file trick to get your
  2201. hp200lx palmtop to run nettamer from a clean boot, and then continue
  2202. with the normal system manager stuff when you exit nettamer.  This means
  2203. nettamer has plenty of RAM available, and nothing interfering with it.
  2204. The procedure is straight forward, but see step 2.
  2205.  
  2206. 1. Create a one line batch file called, for example, 
  2207.  
  2208.   C:\progs\setnt.bat
  2209.  
  2210. that contains the single line
  2211.  
  2212.   echo nt >c:\nt-boot.lck
  2213.  
  2214. 2. Add an entry (icon etc.) in System Manager / "More Applications" to
  2215. run this batch file.  Instructions for this are in the manual, if you're
  2216. not familiar with this it's probably not safe for you to alter your
  2217. autoexec.bat in the next step - i.e. you shouldn't be doing this.
  2218.  
  2219. 3. Add the following early in your c:\autoexec.bat file.
  2220.  
  2221.   if not exist c:\nt-boot.lck goto nont
  2222.   del c:\nt-boot.lck
  2223.   c:
  2224.   cd \nettamer
  2225.   nettamer
  2226.   :nont
  2227.  
  2228. The "c:" should be changed to whichever drive you have nettamer on
  2229. (probably a: if it's a flash card), and the "cd \nettamer" should match
  2230. whichever directory you have nettamer in, possibly "cd \comms\nt" or
  2231. whatever.
  2232.  
  2233. The above addition should be placed in autoexec.bat after any drivers
  2234. that you need to run nettamer (the double speed crystal driver for
  2235. example), but before anything that isn't needed by nettamer, eg. buddy
  2236. etc.  It should definitely be before the line to start the system
  2237. manager, which says "200" on an HP 200 LX.
  2238.  
  2239. That's pretty much it.  To run nettamer I just save anything that needs
  2240. saving, select (and run) the icon for the batch file described in step
  2241. 2., and re-boot (Ctrl-Alt-Del).  Nettamer runs, does its thing, and the
  2242. system starts as per usual when you exit nettamer.
  2243.  
  2244. From: dave.martin@ibm.net
  2245. Subject: LOG File for nettamer for use with IBM/Advantis PPP Connection
  2246.  
  2247. David,
  2248.  
  2249. I just discovered that IBM has implemented their PPP capability on their
  2250. internet connection in the US.
  2251.  
  2252. However, they say that their PPP connections:
  2253.  
  2254. [...]
  2255.  
  2256. 7.   Logon Scripts are NOT used.
  2257.  
  2258. 8.   Password Authentication Protocol (PAP) should be enabled....
  2259.  
  2260. - Only IP (Internet Protocol) datagrams are accepted, all others are
  2261. discarded.
  2262.  
  2263. ------------End of quoted material---------------
  2264.  
  2265. The effect of this is that you never see the prompts, or it doesn't produce
  2266. prompts.  Due to some experiences I had with my other ISP which used
  2267. Password Authentication Protocol, and what I had to do to get it to work,
  2268. I adapted a REXX command file that I was using to send the information that
  2269. I thought it needed, and it works.  So here it is, in case you have anyone
  2270. else who comes up with a problem using PPP with IBM.
  2271.  
  2272. BLAST Username$
  2273. DELAY 5
  2274. BLAST Password$
  2275. BLAST user userid name userid secret password
  2276. PPP
  2277.  
  2278. The "Username$" as supplied by the program will be (the contents of
  2279. the program defaults, which must be as follows:
  2280.  
  2281. A. Login name: must be "internet.usinet.username"
  2282.      This is assuming your account is a US internet account (usinet).
  2283.  
  2284. E.  DNS Address: 165.87.194.244,165.87.201.244
  2285. F`  POP3 URL: pop03.ca.us.ibm.net OR pop01.ny.us.ibm.net
  2286. G.  SMTP URL: smpt-gw01.ca.us.ibm.net OR smtp-gw01.ny.us.ibm.net
  2287. H:  NNIP URL: news-s01.ny.us.ibm.net
  2288.  
  2289. The fourth line in the script file sends the stuff that PAP needs, at least
  2290. in OS/2 these were parameters that could be added to the command line when
  2291. running PPP.EXE (that is "user", "name", and "secret"). The user and name
  2292. parameters both take the userid, and the secret parameter takes your
  2293. password.
  2294.  
  2295. IBM Support didn't know what I was talking about, but it works for me.
  2296.  
  2297. I hope you will find it useful.
  2298.  
  2299. ---------
  2300. From: Craig Peacock <craig@enterprise.net>
  2301. Subject: Re: Nettamer
  2302.  
  2303. Hi,
  2304.  
  2305. Well to use the mobile phone instead of the pcmcia port you need to do
  2306. the following:
  2307.  
  2308. at a dos prompt type 
  2309.  
  2310. c:> serctl /p
  2311.  
  2312. Should say something like com1 redirected to the phone. and the phone light
  2313. on the front of the ogo700 should flash
  2314.  
  2315. c:> nettamer
  2316.  
  2317. Setup nettamer to use com1, and all should be well.
  2318.  
  2319. When finished with nettamer c:\> serctl /o diverts com1 back to the external
  2320. port. If you have any more problems then feel free to email me.
  2321.  
  2322. Craig
  2323.  
  2324. Return-path: <suemark@delphi.com>
  2325. Received: from bix.com (1073744992@bix.com) by delphi.com (PMDF V5.0-7 #10880)
  2326.  id <01IDT141J5Y88ZH188@delphi.com>; Sat, 04 Jan 1997 06:54:01 -0500 (EST)
  2327. Date: Sat, 04 Jan 1997 06:54:02 -0500
  2328. From: Susan Mark <suemark@delphi.com>
  2329. Subject: Re: Lockups with v1.08
  2330. To: davidcolston@delphi.com, ksgrisse@hiwaay.net
  2331. Message-id: <01IDT143OBR68ZH188@delphi.com>
  2332. MIME-version: 1.0
  2333. X-Mailer: Microsoft Internet Mail 4.70.1155
  2334. Content-type: text/plain; charset=ISO-8859-1
  2335. Content-transfer-encoding: 7bit
  2336. X-MSMail-Priority: Normal
  2337. X-Priority: 3
  2338.  
  2339. Hi. You have enough memory to run Nettamer. In fact, you could run it
  2340. with much less. Check to see what your video address is then go into
  2341. qemm setup and EXCLUDE that address from being moved to high
  2342. memory. If you are running stealth, turn that feature off. Now optimize
  2343. again and try running nettamer.
  2344. QEMM's diagnostic program will tell you where your video address
  2345. is located, and there is a feature for excluding those addresses in
  2346. the setup program. This should work..
  2347. Sue
  2348.  
  2349. > On 1997-01-04 ksgrisse@hiwaay.net said to davidcolston@delphi.com
  2350. >    >OK.  So where should I start?  Addresses I mean?  If this is the
  2351. >    >problem, then I would assume you know what addresses I should use
  2352. >    >and how much EMS I should allocate, etc.  Not meaning to sound
  2353. >    >sarcastic, but I don't believe this a problem with my system.  One
  2354. >    >of your beta's almost worked with the full graphical, but
  2355. >    >unfortunately I over-wrote it.
  2356. >    >I currently have 4 megs memory on this system with something over
  2357. >    >704k available for EMS/XMS while using Nettamer.  Is that the
  2358. >    >problem?  Do I not have enough EMS available?  If so, then this
  2359. >    >limitation should be included in the docs.  Thanks for your work
  2360. >    >and interest in making a DOS compatible WWW browser.  If I can
  2361. >    >provide any more info, juz lemme no. <wink>
  2362. > I am copying this to the only other QEMM user that I can think of
  2363. > off hand. Sue may be able to help. If she can, then I'll put the
  2364. > answer in the doc file<G>.
  2365. >                                  David Colston
  2366. >                                  'Uncle Dave'
  2367. > *********************************************************************
  2368. > * You don't need a pentium to surf the net, find out why! Check out *
  2369. > * Net-Tamer at: http://people.delphi.com/davidcolston/              *
  2370. > *                Internet In A Thimble!                             *
  2371. > * Check out alt.comp.shareware.nettamer or the Net-Tamer listserver *
  2372. > * To subscribe send a message to:                                   *
  2373. > * nettamer-request@pop.ademco.com                                   *
  2374. > * In the body of the message include the word:                      *
  2375. > * subscribe                                                         *
  2376. > *********************************************************************
  2377. > MONEY TALKS ...   but all mine ever says is GOODBYE!
  2378. > Net-Tamer V 1.08 - Registered
  2379. .
  2380.  
  2381.